Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two black 240-pin DDR3 DIMMs, 16GB total, no heat spreaders

OWC

OWC 16GB (2x8GB) DDR3 1333 PC3-10600 CL9 1.5V Desktop RAM

SKU CH-Q2PM-SK1CE

A 16GB dual-channel DDR3 kit running at 1333MHz with CL9 latency and 1.5V operation for desktop upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR3 1333 PC3-10600 CL9 timing matches JEDEC spec for broad desktop compatibility
  • 5 V standard voltage keeps power draw low on supported platforms
  • Unbuffered non-ECC 240-pin DIMMs install easily in consumer motherboards
  • OWC 100 % compliant modules tested in-house for reliable upgrades

16GB dual-channel DDR3 kit

This kit delivers 16GB of DDR3 memory in two 8GB modules rated at 1333MHz with CL9 latency. It is built for desktop systems that accept 240-pin unbuffered DIMMs running at 1.5V. The modules comply with JEDEC PC3-10600 specifications and are non-ECC.

Replaces older DDR3 modules or smaller kits

Upgrading from a 4GB or 8GB DDR3 configuration to this 16GB kit is worthwhile when the platform supports the full capacity and the workload involves multiple open applications. The dual-channel layout matches the motherboard architecture for balanced throughput.

Steady throughput under load

Because the modules operate at the standard 1.5V JEDEC voltage, they maintain their rated 1333MHz speed without requiring elevated voltages that can increase heat. The absence of a heat spreader means airflow across the PCB is the primary cooling path, which is sufficient for typical desktop workloads.

Puncte forte

  • 16 GB dual-channel kit doubles memory bandwidth for multitasking
  • DDR3 1333 PC3-10600 CL9 timing matches JEDEC spec for broad desktop compatibility
  • 5 V standard voltage keeps power draw low on supported platforms
  • Unbuffered non-ECC 240-pin DIMMs install easily in consumer motherboards
  • OWC 100 % compliant modules tested in-house for reliable upgrades

Specificații

BrandOWC
Part Number1U3D32R8016P
Capacity16GB (2 x 8GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will this 16GB kit fit a desktop that uses 240-pin DDR3 slots?

Yes, the modules are 240-pin unbuffered DDR3 DIMMs built to JEDEC PC3-10600 1333MHz CL9 1.5V specification, the standard for desktop DDR3 sockets.

Does the kit run at 1.5V or do I need a board that supports lower voltage?

The kit is rated at 1.5V; it requires a motherboard that supplies standard DDR3 1.5V power.

Can I add these two 8GB sticks alongside my existing 4GB DDR3 modules?

Mixing capacities works if the board supports the total 16GB per channel and all modules share 1333MHz CL9 1.5V timings; otherwise the system will downclock to the slowest stick.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.