Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3L ECC RDIMM modules side by side

OWC

OWC 16GB (2x8GB) DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade

SKU CH-4NN5-QKZ33

16 GB DDR3L ECC registered kit (2 × 8 GB, 1600 MHz, CL11, 1.35 V) for Cisco UCS C200 M2 and C210 M2 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands Cisco UCS C200 M2 and C210 M2 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 2Rx4 240-pin RDIMM form factor fits validated server slots
  • Replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB, UCSMR2X082RYE

Server memory kit

This 16 GB kit contains two 8 GB DDR3L 1600 ECC registered DIMMs built for Cisco UCS C200 M2 and C210 M2 servers. The modules run at 1.35 V with CL11 latency and a 2Rx4 organisation. They are designed for workstation and server platforms that require registered memory with error correction.

Replaces Cisco parts

The kit replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB and UCSMR2X082RYE, letting you extend the life of existing infrastructure or build a replacement system at lower cost. It will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced ECC modules.

Sustained operation

Registered buffering and ECC correction maintain data integrity during continuous workloads typical of servers and NAS systems. JEDEC and RoHS compliance ensures stable operation at the rated 1600 MHz speed under prolonged load.

Helstu kostir

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands Cisco UCS C200 M2 and C210 M2 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 2Rx4 240-pin RDIMM form factor fits validated server slots
  • Replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB, UCSMR2X082RYE

Tæknilýsing

BrandOWC
Part Number1R6T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C200 M2
Cisco UCS C210 M2

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 240-pin DDR3L modules fit the DIMM slots on my Cisco UCS C200 M2?

Yes, the kit uses the 240-pin DDR3L form factor specified for the Cisco UCS C200 M2 and C210 M2.

Do I need to install the two 8 GB sticks as a matched pair in specific slots?

Install both modules in the same channel following the server's population guide; mixing registered with unbuffered or load-reduced memory will prevent boot.

How can I tell when a module should be replaced under the lifetime warranty?

Run the server's built-in memory diagnostics; persistent correctable ECC errors or uncorrectable faults indicate a module that qualifies for replacement.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.