Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3L ECC RDIMM modules side by side

OWC

OWC 16GB (2x8GB) DDR3L 1600 PC3L-12800 CL11 2Rx4 240-pin 1.35V ECC Registered RDIMM memory upgrade

SKU CH-4NN5-QKZ33

16 GB DDR3L ECC registered kit (2 × 8 GB, 1600 MHz, CL11, 1.35 V) for Cisco UCS C200 M2 and C210 M2 servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands Cisco UCS C200 M2 and C210 M2 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 2Rx4 240-pin RDIMM form factor fits validated server slots
  • Replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB, UCSMR2X082RYE

Server memory kit

This 16 GB kit contains two 8 GB DDR3L 1600 ECC registered DIMMs built for Cisco UCS C200 M2 and C210 M2 servers. The modules run at 1.35 V with CL11 latency and a 2Rx4 organisation. They are designed for workstation and server platforms that require registered memory with error correction.

Replaces Cisco parts

The kit replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB and UCSMR2X082RYE, letting you extend the life of existing infrastructure or build a replacement system at lower cost. It will not work in standard desktop computers and cannot be mixed with unbuffered or load-reduced ECC modules.

Sustained operation

Registered buffering and ECC correction maintain data integrity during continuous workloads typical of servers and NAS systems. JEDEC and RoHS compliance ensures stable operation at the rated 1600 MHz speed under prolonged load.

Přednosti

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands Cisco UCS C200 M2 and C210 M2 capacity
  • DDR3L 1600 CL11 at 1.35 V lowers power draw versus standard DDR3
  • 2Rx4 240-pin RDIMM form factor fits validated server slots
  • Replaces Cisco part numbers UCSMR1X082RYA, UCSMR2X082RYB, UCSMR2X082RYE

Specifikace

BrandOWC
Part Number1R6T32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemCisco UCS C200 M2
Cisco UCS C210 M2

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 240-pin DDR3L modules fit the DIMM slots on my Cisco UCS C200 M2?

Yes, the kit uses the 240-pin DDR3L form factor specified for the Cisco UCS C200 M2 and C210 M2.

Do I need to install the two 8 GB sticks as a matched pair in specific slots?

Install both modules in the same channel following the server's population guide; mixing registered with unbuffered or load-reduced memory will prevent boot.

How can I tell when a module should be replaced under the lifetime warranty?

Run the server's built-in memory diagnostics; persistent correctable ECC errors or uncorrectable faults indicate a module that qualifies for replacement.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.