Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green 240-pin DDR3 server memory modules with gold contacts

OWC

OWC 32GB (4x8GB) DDR3 1866 CL13 ECC Registered RDIMM server RAM

SKU CH-EAQ4-1Y6ZV

Four 8 GB DDR3-1866 ECC registered RDIMMs totalling 32 GB for servers and workstations

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

Rank 1Rx4

  • ECC registered design protects data integrity in servers
  • 1866 MHz DDR3 speed with CL13 latency supports responsive workloads
  • 32 GB quad-channel kit expands memory capacity for virtualization
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 240-pin registered DIMM form factor fits select workstations and servers

32 GB DDR3-1866 ECC Registered Kit

This OWC kit supplies 32 GB of DDR3 1866 registered ECC memory across four 8 GB modules. It uses 240-pin RDIMMs rated at PC3-14900 with CL13 latency and 1.5 V operation. The modules are unbuffered-rank 1Rx4 and carry no heat spreader. They are built for workstations, servers, NAS systems and routers that require registered ECC DDR3.

Suits registered-ECC DDR3 platforms.

Buyers maintaining or expanding servers, workstations or NAS units that accept 240-pin registered ECC DDR3 will find a direct JEDEC-compliant upgrade here. Systems that need unbuffered non-ECC memory, a different DDR generation, SODIMM form factor or higher speeds cannot use this kit. Mixing these registered modules with unbuffered DIMMS is also unsupported.

Registered ECC with 1Rx4 organisation

The single specification that decides fit is the registered ECC RDIMM design with 1Rx4 rank structure. Only platforms explicitly qualified for 240-pin DDR3 1866 registered ECC memory at 1.5 V can accept this kit; all other memory controllers will reject it.

Přednosti

  • ECC registered design protects data integrity in servers
  • 1866 MHz DDR3 speed with CL13 latency supports responsive workloads
  • 32 GB quad-channel kit expands memory capacity for virtualization
  • 5 V JEDEC standard voltage ensures broad platform compatibility
  • 240-pin registered DIMM form factor fits select workstations and servers

Specifikace

BrandOWC
Part Number1R8D31R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Should I buy the 32GB kit as four 8GB modules or look for a different capacity?

This kit provides 32GB total across four 8GB modules, giving you four populated slots for maximum bandwidth on compatible platforms.

What does the 1866MHz speed mean for actual server workloads?

The modules run at DDR3 1866 (PC3-14900) with CL13 latency, delivering the rated throughput when the platform memory controller supports that frequency.

Will the 240-pin registered ECC interface work in my workstation?

These are 240-pin DDR3 ECC registered DIMMs at 1.5V; they require a workstation or server board that supports registered memory and cannot be mixed with unbuffered modules.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.