Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black 288-pin DDR4 UDIMM modules, no heat spreader, 32GB kit

OWC

OWC 32GB (2x16GB) DDR4 2400 CL17 ECC Unbuffered UDIMM desktop RAM

SKU CH-27CE-RHKJG

A 32 GB dual-channel kit of two 16 GB DDR4 2400 CL17 ECC unbuffered UDIMMs running at 1.2 V for workstations, servers and NAS systems

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 32GB (2 x 16GB)

  • ECC protection guards data integrity in workstations and servers
  • 32 GB dual-channel kit adds responsive multitasking headroom
  • DDR4 2400 CL17 at 1.2 V runs cool and efficient
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz systems for flexible deployment

32 GB dual-channel ECC kit

This OWC kit supplies 32 GB of DDR4 memory in a matched pair of 16 GB unbuffered UDIMMs. Error-correcting code protects data integrity for workstations, servers and NAS devices. The modules run at 2400 MHz with CL17 latency at 1.2 V.

JEDEC compliance and backward compatibility

Each module meets JEDEC PC4-19200 specifications and is RoHS compliant. The kit also operates at 2133 MHz when installed in systems limited to that speed. No heat spreader is fitted, keeping the profile low for dense server chassis.

288-pin unbuffered DIMM form factor

The standard 288-pin layout fits desktop, workstation, server and NAS motherboards that accept unbuffered ECC UDIMMs. Black PCBs give a neutral appearance. Installation follows typical DIY memory upgrade procedures.

Přednosti

  • ECC protection guards data integrity in workstations and servers
  • 32 GB dual-channel kit adds responsive multitasking headroom
  • DDR4 2400 CL17 at 1.2 V runs cool and efficient
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • Backward compatible with 2133 MHz systems for flexible deployment

Specifikace

BrandOWC
Part Number2E4D42R8032P
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this memory fit a standard desktop motherboard with 288-pin DDR4 slots?

Yes, the kit uses the standard 288-pin DDR4 UDIMM form factor and runs at 1.2 V, so it installs in any desktop board that accepts unbuffered DDR4 DIMMs.

Does my system need to support ECC for these modules to work?

The modules include ECC circuitry, but they will operate as non-ECC memory on consumer platforms that do not enable ECC; full error correction requires a CPU and chipset that support it.

Can I mix this 2400 MHz kit with existing 2133 MHz DDR4 memory?

The kit is backward compatible with 2133 MHz DDR4, so it will downclock automatically to match slower modules already installed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.