Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board 240 pin DDR3 RDIMM module no heat spreader

OWC

OWC 1R6D31R408GB 8GB DDR3 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-ZCWT-ZNVFP

8 GB DDR3-1600 ECC registered RDIMM for Supermicro X9 server and workstation boards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design prevents data corruption in servers
  • 1600 MHz DDR3 speed matches PC3-12800 spec for responsive workloads
  • CL11 latency at 1.5 V keeps power draw low
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Validated for Supermicro X9DAE, X9DAi, X9DBS, X9SRA, X9SRE motherboards

Server ECC RDIMM upgrade

This 8 GB DDR3 1600 module is built for Supermicro X9DAE, X9DAi, X9DBS, X9SRA and X9SRE motherboards. It targets administrators who need registered ECC memory for workstation, server, NAS or router platforms.

Capacity and headroom

A single 8 GB rank adds meaningful capacity to multi-slot server boards running memory-intensive workloads. The registered buffer and ECC protect data integrity, but the DDR3 1600 interface limits throughput on modern compute tasks.

Registered ECC constraint

This module uses 1.5 V registered ECC DDR3 technology and will not work in standard desktop systems or alongside unbuffered DIMMs. Buyers must verify their platform requires registered ECC memory before ordering.

Helstu kostir

  • ECC registered design prevents data corruption in servers
  • 1600 MHz DDR3 speed matches PC3-12800 spec for responsive workloads
  • CL11 latency at 1.5 V keeps power draw low
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Validated for Supermicro X9DAE, X9DAi, X9DBS, X9SRA, X9SRE motherboards

Tæknilýsing

BrandOWC
Part Number1R6D31R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAE Series
Supermicro Motherboard X9DAi Series
Supermicro Motherboard X9DBS Series
Supermicro Motherboard X9SRA Series
Supermicro Motherboard X9SRE Series

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will this 240-pin DDR3 1600 ECC Registered RDIMM work alongside the existing unbuffered modules in my Supermicro X9DAE server?

No, the registered design cannot be mixed with unbuffered memory; all slots must use registered ECC modules for the system to operate correctly.

How can I verify the 8GB CL11 module is running at the correct 1600 MHz speed after installation?

Check the BIOS memory information or use a tool such as CPU-Z to confirm the module reports DDR3-1600 (PC3-12800) at CL11 latency.

Does the single 1Rx4 1.5 V stick ship with any additional parts or do I need to buy a heatsink separately?

The box contains only the bare 240-pin RDIMM; no heatspreader, cables or extra hardware are included or required for standard server use.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.