Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board 240 pin DDR3 RDIMM module no heat spreader

OWC

OWC 1R6D31R408GB 8GB DDR3 1600 CL11 ECC Registered RDIMM memory upgrade

SKU CH-ZCWT-ZNVFP

8 GB DDR3-1600 ECC registered RDIMM for Supermicro X9 server and workstation boards

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design prevents data corruption in servers
  • 1600 MHz DDR3 speed matches PC3-12800 spec for responsive workloads
  • CL11 latency at 1.5 V keeps power draw low
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Validated for Supermicro X9DAE, X9DAi, X9DBS, X9SRA, X9SRE motherboards

Server ECC RDIMM upgrade

This 8 GB DDR3 1600 module is built for Supermicro X9DAE, X9DAi, X9DBS, X9SRA and X9SRE motherboards. It targets administrators who need registered ECC memory for workstation, server, NAS or router platforms.

Capacity and headroom

A single 8 GB rank adds meaningful capacity to multi-slot server boards running memory-intensive workloads. The registered buffer and ECC protect data integrity, but the DDR3 1600 interface limits throughput on modern compute tasks.

Registered ECC constraint

This module uses 1.5 V registered ECC DDR3 technology and will not work in standard desktop systems or alongside unbuffered DIMMs. Buyers must verify their platform requires registered ECC memory before ordering.

Přednosti

  • ECC registered design prevents data corruption in servers
  • 1600 MHz DDR3 speed matches PC3-12800 spec for responsive workloads
  • CL11 latency at 1.5 V keeps power draw low
  • Single 8 GB 1Rx4 module simplifies capacity expansion
  • Validated for Supermicro X9DAE, X9DAi, X9DBS, X9SRA, X9SRE motherboards

Specifikace

BrandOWC
Part Number1R6D31R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DAE Series
Supermicro Motherboard X9DAi Series
Supermicro Motherboard X9DBS Series
Supermicro Motherboard X9SRA Series
Supermicro Motherboard X9SRE Series

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will this 240-pin DDR3 1600 ECC Registered RDIMM work alongside the existing unbuffered modules in my Supermicro X9DAE server?

No, the registered design cannot be mixed with unbuffered memory; all slots must use registered ECC modules for the system to operate correctly.

How can I verify the 8GB CL11 module is running at the correct 1600 MHz speed after installation?

Check the BIOS memory information or use a tool such as CPU-Z to confirm the module reports DDR3-1600 (PC3-12800) at CL11 latency.

Does the single 1Rx4 1.5 V stick ship with any additional parts or do I need to buy a heatsink separately?

The box contains only the bare 240-pin RDIMM; no heatspreader, cables or extra hardware are included or required for standard server use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.