Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
15 inch flat aluminium panel PC with resistive multi-touch screen and fanless chassis

partaker

partaker A20 15" IP65 Industrial All-in-One PC J6413 8GB DDR4 256GB

SKU CH-GEKK-TVFN7

A 15-inch IP65-rated all-in-one panel PC with Intel Celeron J6413, 8GB DDR4, 256GB SATA SSD, Windows 11 Pro, multi-touch resistive screen, three LAN ports.

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeCeleron
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity8GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Celeron

Memory Capacity 8GB DDR4

SSD 256GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium chassis runs silently 24/7
  • Windows 11 Pro pre-installed for immediate deployment
  • Triple Intel LAN plus dual COM for industrial connectivity
  • 9-36 V wide-range DC input suits unstable power environments

Industrial all-in-one for 24/7 operation

The Partaker A20 is a 15-inch fanless panel PC rated IP65 on the front, built for continuous industrial use. It runs Windows 11 Pro on an Intel Celeron J6413 processor with 8GB DDR4 memory and a 256GB SATA SSD. The aluminium chassis provides silent, passive cooling across a wide operating temperature range.

Suits embedded automation; not for high-end graphics

This unit fits machine interfaces, kiosks and control cabinets that need a sealed, multi-touch resistive screen and legacy COM ports for RS232/422/485. Three Intel gigabit LAN ports and a 9–36V Phoenix power input support harsh electrical environments. It is not for buyers who need discrete graphics performance, higher resolution than 1024×768, or storage speeds beyond the SATA interface.

15″ IP65 resistive touch decides fit

The 15-inch 4:3 display with 350 cd/m² brightness and industrial-grade resistive touch is the primary selection criterion. If the application requires a larger diagonal, a capacitive touch layer, or a different aspect ratio, this panel will not match the mechanical or ergonomic requirements.

Helstu kostir

  • IP65 front panel resists dust and water jets
  • Fanless aluminium chassis runs silently 24/7
  • Windows 11 Pro pre-installed for immediate deployment
  • Triple Intel LAN plus dual COM for industrial connectivity
  • 9-36 V wide-range DC input suits unstable power environments

Tæknilýsing

ModelA20-New-J6412-8G256G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeCeleron
GPU/VGA TypeIntel UHD Graphics
Memory Capacity8GB DDR4
Maximum Memory Supported32 GB
SSD256GB
HDDNo
Screen Size15"
TouchscreenYes

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What DDR4 SODIMM speed and maximum capacity does the J6413 system board support for a memory upgrade?

The board accepts one DDR4-2133 SODIMM and supports up to 32 GB total.

Can the three Intel 1000M LAN ports and two COM ports operate simultaneously with legacy RS-232 or RS-485 devices?

Yes, all three LAN ports and both COM ports are independent; COM1 and COM2 can be configured for RS232, RS422 or RS485.

How can I verify the IP65 front panel and multi-touch screen are functioning correctly after embedded installation?

Confirm the 1024 x 768 resolution at 350 cd/m² brightness, test multi-touch response across the full viewing angle, and check that the front seals remain intact.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.