Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
15 inch flat aluminium panel PC with resistive multi-touch screen and fanless chassis

partaker

partaker A20 15" IP65 Industrial All-in-One PC J6413 8GB DDR4 256GB

SKU CH-GEKK-TVFN7

A 15-inch IP65-rated all-in-one panel PC with Intel Celeron J6413, 8GB DDR4, 256GB SATA SSD, Windows 11 Pro, multi-touch resistive screen, three LAN ports.

  • Form FactorAll-in-One
  • Operating SystemWindows 11 Pro
  • CPU TypeCeleron
  • GPU/VGA TypeIntel UHD Graphics
  • Memory Capacity8GB DDR4
  • Maximum Memory Supported32 GB

CPU Type Celeron

Memory Capacity 8GB DDR4

SSD 256GB

  • IP65 front panel resists dust and water jets
  • Fanless aluminium chassis runs silently 24/7
  • Windows 11 Pro pre-installed for immediate deployment
  • Triple Intel LAN plus dual COM for industrial connectivity
  • 9-36 V wide-range DC input suits unstable power environments

Industrial all-in-one for 24/7 operation

The Partaker A20 is a 15-inch fanless panel PC rated IP65 on the front, built for continuous industrial use. It runs Windows 11 Pro on an Intel Celeron J6413 processor with 8GB DDR4 memory and a 256GB SATA SSD. The aluminium chassis provides silent, passive cooling across a wide operating temperature range.

Suits embedded automation; not for high-end graphics

This unit fits machine interfaces, kiosks and control cabinets that need a sealed, multi-touch resistive screen and legacy COM ports for RS232/422/485. Three Intel gigabit LAN ports and a 9–36V Phoenix power input support harsh electrical environments. It is not for buyers who need discrete graphics performance, higher resolution than 1024×768, or storage speeds beyond the SATA interface.

15″ IP65 resistive touch decides fit

The 15-inch 4:3 display with 350 cd/m² brightness and industrial-grade resistive touch is the primary selection criterion. If the application requires a larger diagonal, a capacitive touch layer, or a different aspect ratio, this panel will not match the mechanical or ergonomic requirements.

Pluspunten

  • IP65 front panel resists dust and water jets
  • Fanless aluminium chassis runs silently 24/7
  • Windows 11 Pro pre-installed for immediate deployment
  • Triple Intel LAN plus dual COM for industrial connectivity
  • 9-36 V wide-range DC input suits unstable power environments

Specificaties

ModelA20-New-J6412-8G256G
Form FactorAll-in-One
Operating SystemWindows 11 Pro
CPU TypeCeleron
GPU/VGA TypeIntel UHD Graphics
Memory Capacity8GB DDR4
Maximum Memory Supported32 GB
SSD256GB
HDDNo
Screen Size15"
TouchscreenYes

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

What DDR4 SODIMM speed and maximum capacity does the J6413 system board support for a memory upgrade?

The board accepts one DDR4-2133 SODIMM and supports up to 32 GB total.

Can the three Intel 1000M LAN ports and two COM ports operate simultaneously with legacy RS-232 or RS-485 devices?

Yes, all three LAN ports and both COM ports are independent; COM1 and COM2 can be configured for RS232, RS422 or RS485.

How can I verify the IP65 front panel and multi-touch screen are functioning correctly after embedded installation?

Confirm the 1024 x 768 resolution at 350 cd/m² brightness, test multi-touch response across the full viewing angle, and check that the front seals remain intact.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.