Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Round 1.28 inch touch display on compact green development board with exposed GPIO pins

SMUGDESK

SMUGDESK RP2040-Touch-LCD-1.28 Development Board 1.28" 240×240 65K IMU

SKU CH-6JKF-FX83A

A compact RP2040 development board with a 1.28-inch 240×240 65K colour touchscreen and built-in 6-axis IMU for wearable and motion-sensing projects

  • RP2040 dual-core processor runs at 133 MHz for responsive embedded control
  • 28 inch round IPS touch LCD shows 240×240 pixels in 65K colours
  • Onboard 6-axis IMU combines accelerometer and gyroscope for motion tracking
  • Compact PCB reserves GPIO pins for connecting sensors, actuators and displays
  • MicroPython and C/C++ demos included for rapid prototype development

Compact All-in-One IoT Board

The SMUGDESK RP2040-Touch-LCD-1.28 combines a dual-core RP2040 microcontroller, a 1.28-inch circular IPS touch display and a 6-axis IMU on a single PCB. It targets makers building wearable devices, smart watches, motion detectors or DIY embedded projects that need graphics and sensing together.

Integrated Display and Motion Sensors

The 240×240 round panel delivers 65K RGB colour with wide viewing angles and supports capacitive touch for gestures and menu navigation. An onboard accelerometer and gyroscope capture tilt, vibration, rotation and posture data for pedometers, balance robots or game controllers. Reserved GPIO pins allow peripheral expansion without soldering directly to the main chip.

RP2040 Platform Constraints

The dual-core ARM Cortex-M0+ runs at up to 133 MHz and relies on internal flash and SRAM, so storage and memory are fixed by the silicon. Development uses MicroPython or C/C++ with open-source demos, but the board lacks wireless radios, so any networking needs external modules. The small round screen limits text density and complex UI layouts compared to larger rectangular displays.

Helstu kostir

  • RP2040 dual-core processor runs at 133 MHz for responsive embedded control
  • 28 inch round IPS touch LCD shows 240×240 pixels in 65K colours
  • Onboard 6-axis IMU combines accelerometer and gyroscope for motion tracking
  • Compact PCB reserves GPIO pins for connecting sensors, actuators and displays
  • MicroPython and C/C++ demos included for rapid prototype development

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

What display interface does the 1.28 inch 240×240 panel use and what colour depth does it cap at?

The circular IPS touch LCD connects directly to the RP2040 and renders 65K RGB colours at its native 240×240 resolution.

What physical mounting features does the board provide for a wearable or enclosure design?

The compact integrated PCB includes reserved GPIO breakout pins around the edge for soldering headers or wires into a custom case or strap.

How is the board programmed and which step do beginners often miss?

Connect via USB, hold the BOOTSEL button while plugging in to enter mass-storage mode, then drag the MicroPython or C/C++ firmware UF2 file onto the drive.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.