Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Round 1.28 inch touch display on compact green development board with exposed GPIO pins

SMUGDESK

SMUGDESK RP2040-Touch-LCD-1.28 Development Board 1.28" 240×240 65K IMU

SKU CH-6JKF-FX83A

A compact RP2040 development board with a 1.28-inch 240×240 65K colour touchscreen and built-in 6-axis IMU for wearable and motion-sensing projects

  • RP2040 dual-core processor runs at 133 MHz for responsive embedded control
  • 28 inch round IPS touch LCD shows 240×240 pixels in 65K colours
  • Onboard 6-axis IMU combines accelerometer and gyroscope for motion tracking
  • Compact PCB reserves GPIO pins for connecting sensors, actuators and displays
  • MicroPython and C/C++ demos included for rapid prototype development

Compact All-in-One IoT Board

The SMUGDESK RP2040-Touch-LCD-1.28 combines a dual-core RP2040 microcontroller, a 1.28-inch circular IPS touch display and a 6-axis IMU on a single PCB. It targets makers building wearable devices, smart watches, motion detectors or DIY embedded projects that need graphics and sensing together.

Integrated Display and Motion Sensors

The 240×240 round panel delivers 65K RGB colour with wide viewing angles and supports capacitive touch for gestures and menu navigation. An onboard accelerometer and gyroscope capture tilt, vibration, rotation and posture data for pedometers, balance robots or game controllers. Reserved GPIO pins allow peripheral expansion without soldering directly to the main chip.

RP2040 Platform Constraints

The dual-core ARM Cortex-M0+ runs at up to 133 MHz and relies on internal flash and SRAM, so storage and memory are fixed by the silicon. Development uses MicroPython or C/C++ with open-source demos, but the board lacks wireless radios, so any networking needs external modules. The small round screen limits text density and complex UI layouts compared to larger rectangular displays.

Puncte forte

  • RP2040 dual-core processor runs at 133 MHz for responsive embedded control
  • 28 inch round IPS touch LCD shows 240×240 pixels in 65K colours
  • Onboard 6-axis IMU combines accelerometer and gyroscope for motion tracking
  • Compact PCB reserves GPIO pins for connecting sensors, actuators and displays
  • MicroPython and C/C++ demos included for rapid prototype development

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

What display interface does the 1.28 inch 240×240 panel use and what colour depth does it cap at?

The circular IPS touch LCD connects directly to the RP2040 and renders 65K RGB colours at its native 240×240 resolution.

What physical mounting features does the board provide for a wearable or enclosure design?

The compact integrated PCB includes reserved GPIO breakout pins around the edge for soldering headers or wires into a custom case or strap.

How is the board programmed and which step do beginners often miss?

Connect via USB, hold the BOOTSEL button while plugging in to enter mass-storage mode, then drag the MicroPython or C/C++ firmware UF2 file onto the drive.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.