Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver #6-32 hex Phillips standoff screws 0.25in 50 pack

STARTECH

STARTECH SCREW6_32 #6-32 x .25in standoff screws 50 pack case accessory

SKU CH-APEE-VCHSE MPN SCREW6_32

#6-32 hex/Phillips standoff screws, 0.25 in long, 50-pack for PC case mounting

  • TypesScrews & Mount
  • ColorsSilver
  • Length0 ft.
  • SpecificationsHead Pattern: Hex / Phillips Package Quantity: 50 Thread Typ

Option 50 Screws - #6-32

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • #6-32 thread fits standard PC cases
  • 25 in length clears motherboard standoffs
  • Hex and Phillips heads accept two driver types
  • 50 screws cover multiple builds and spares
  • Silver finish resists corrosion in chassis

Replacement Standoff Screws

The StarTech.com SCREW6_32 pack supplies fifty #6-32 thread standoff screws measuring 0.25 in (6.3 mm) long. They are designed for securing motherboards, expansion cards or drive cages inside standard PC cases. The hex/Phillips head pattern allows installation with common tools. Builders who need a different thread pitch or longer standoffs will need a separate hardware kit.

Thermals Noise Power

These passive metal fasteners generate no heat, produce no audible noise and draw zero electrical power. They have no moving parts, fans or electronic components that could affect system thermals or acoustics. Their only physical influence is the minimal mass added to the chassis. Installers should ensure the standoffs seat fully to avoid shorting traces on the board.

Included Hardware Impact

The fifty-piece quantity covers multiple full motherboard installations or provides spares for future upgrades. The combined hex and Phillips drive lets technicians choose the driver that fits tight clearances around components. Silver finish resists corrosion during long service life. No software, adhesives or specialised tools are bundled with the pack.

Helstu kostir

  • #6-32 thread fits standard PC cases
  • 25 in length clears motherboard standoffs
  • Hex and Phillips heads accept two driver types
  • 50 screws cover multiple builds and spares
  • Silver finish resists corrosion in chassis

Tæknilýsing

BrandStarTech.com
ModelSCREW6_32
TypesScrews & Mount
ColorsSilver
Length0 ft.
SpecificationsHead Pattern: Hex / Phillips
Package Quantity: 50
Thread Type(s): #6-32
Product Length: 0.25 in [6.3 mm]
Sendingarþyngd0.07 kg
Stærð sendingar88 × 64 × 17 mm

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the #6-32 x .25in standoff screws without cross-threading?

Start each screw by hand into the threaded hole, then finish with a hex or Phillips driver until the head seats flush.

Will the #6-32 threads on these .25in standoffs strip or need replacement over time?

The steel threads resist stripping if installed correctly; replacement is only needed if a screw is lost or damaged.

What limits how many of the 50 standoffs I can use in a single build?

The number of #6-32 mounting points on your chassis and motherboard determines the practical limit.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.