Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

STARTECH

STARTECH SCREW6_32 #6-32 x .25in standoff screws 50 pack case accessory

SKU CH-APEE-VCHSE MPN SCREW6_32

#6-32 hex/Phillips standoff screws, 0.25 in long, 50-pack for PC case mounting

  • TypesScrews & Mount
  • ColorsSilver
  • Length0 ft.
  • SpecificationsHead Pattern: Hex / Phillips Package Quantity: 50 Thread Typ

Option 50 Screws - #6-32

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • #6-32 thread fits standard PC cases
  • 25 in length clears motherboard standoffs
  • Hex and Phillips heads accept two driver types
  • 50 screws cover multiple builds and spares
  • Silver finish resists corrosion in chassis

Replacement Standoff Screws

The StarTech.com SCREW6_32 pack supplies fifty #6-32 thread standoff screws measuring 0.25 in (6.3 mm) long. They are designed for securing motherboards, expansion cards or drive cages inside standard PC cases. The hex/Phillips head pattern allows installation with common tools. Builders who need a different thread pitch or longer standoffs will need a separate hardware kit.

Thermals Noise Power

These passive metal fasteners generate no heat, produce no audible noise and draw zero electrical power. They have no moving parts, fans or electronic components that could affect system thermals or acoustics. Their only physical influence is the minimal mass added to the chassis. Installers should ensure the standoffs seat fully to avoid shorting traces on the board.

Included Hardware Impact

The fifty-piece quantity covers multiple full motherboard installations or provides spares for future upgrades. The combined hex and Phillips drive lets technicians choose the driver that fits tight clearances around components. Silver finish resists corrosion during long service life. No software, adhesives or specialised tools are bundled with the pack.

Kohokohdat

  • #6-32 thread fits standard PC cases
  • 25 in length clears motherboard standoffs
  • Hex and Phillips heads accept two driver types
  • 50 screws cover multiple builds and spares
  • Silver finish resists corrosion in chassis

Tekniset tiedot

BrandStarTech.com
ModelSCREW6_32
TypesScrews & Mount
ColorsSilver
Length0 ft.
SpecificationsHead Pattern: Hex / Phillips
Package Quantity: 50
Thread Type(s): #6-32
Product Length: 0.25 in [6.3 mm]
Lähetyspaino0.07 kg
Pakkauksen mitat88 × 64 × 17 mm

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the #6-32 x .25in standoff screws without cross-threading?

Start each screw by hand into the threaded hole, then finish with a hex or Phillips driver until the head seats flush.

Will the #6-32 threads on these .25in standoffs strip or need replacement over time?

The steel threads resist stripping if installed correctly; replacement is only needed if a screw is lost or damaged.

What limits how many of the 50 standoffs I can use in a single build?

The number of #6-32 mounting points on your chassis and motherboard determines the practical limit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.