STARTECH
STARTECH SCREW6_32 #6-32 x .25in standoff screws 50 pack case accessory
#6-32 hex/Phillips standoff screws, 0.25 in long, 50-pack for PC case mounting
- TypesScrews & Mount
- ColorsSilver
- Length0 ft.
- SpecificationsHead Pattern: Hex / Phillips Package Quantity: 50 Thread Typ
Option 50 Screws - #6-32
- 50 Fan Screws - M5
- Kit - Assortment
- 50 Screws - #6-32
- 50 Screws - M3
- 50 Standoffs - #6-32 (inner) to M3 (outer)
- 15 Standoffs - #6-32
Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.
- #6-32 thread fits standard PC cases
- 25 in length clears motherboard standoffs
- Hex and Phillips heads accept two driver types
- 50 screws cover multiple builds and spares
- Silver finish resists corrosion in chassis
Replacement Standoff Screws
The StarTech.com SCREW6_32 pack supplies fifty #6-32 thread standoff screws measuring 0.25 in (6.3 mm) long. They are designed for securing motherboards, expansion cards or drive cages inside standard PC cases. The hex/Phillips head pattern allows installation with common tools. Builders who need a different thread pitch or longer standoffs will need a separate hardware kit.
Thermals Noise Power
These passive metal fasteners generate no heat, produce no audible noise and draw zero electrical power. They have no moving parts, fans or electronic components that could affect system thermals or acoustics. Their only physical influence is the minimal mass added to the chassis. Installers should ensure the standoffs seat fully to avoid shorting traces on the board.
Included Hardware Impact
The fifty-piece quantity covers multiple full motherboard installations or provides spares for future upgrades. The combined hex and Phillips drive lets technicians choose the driver that fits tight clearances around components. Silver finish resists corrosion during long service life. No software, adhesives or specialised tools are bundled with the pack.
Öne çıkanlar
- #6-32 thread fits standard PC cases
- 25 in length clears motherboard standoffs
- Hex and Phillips heads accept two driver types
- 50 screws cover multiple builds and spares
- Silver finish resists corrosion in chassis
Teknik özellikler
| Brand | StarTech.com |
|---|---|
| Model | SCREW6_32 |
| Types | Screws & Mount |
| Colors | Silver |
| Length | 0 ft. |
| Specifications | Head Pattern: Hex / Phillips Package Quantity: 50 Thread Type(s): #6-32 Product Length: 0.25 in [6.3 mm] |
| Kargo ağırlığı | 0.07 kg |
| Koli boyutu | 88 × 64 × 17 mm |
Bu modelin diğer sürümleri
Aynı seriden 4 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
STARTECH SCREWNUTM #6-32 to M3 Brass Standoff 50 Pack
- Screws & Mount
- Gold
STARTECH FANSCREW Case Fan Mounting Screws 50 Pack
- Screws & Mount
- Silver
STARTECH PCSCREWKIT Assortment of Screws, Nuts and Standoffs 12 Types
- Screws & Mount
- Silver
Bu ürünle ilgili sorular
How do I install the #6-32 x .25in standoff screws without cross-threading?
Start each screw by hand into the threaded hole, then finish with a hex or Phillips driver until the head seats flush.
Will the #6-32 threads on these .25in standoffs strip or need replacement over time?
The steel threads resist stripping if installed correctly; replacement is only needed if a screw is lost or damaged.
What limits how many of the 50 standoffs I can use in a single build?
The number of #6-32 mounting points on your chassis and motherboard determines the practical limit.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear







