Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Small square 40mm case fan with black frame and three-pin connector

SXDOOL

SXDOOL DFB402024M 40mm 24V 1.9W 3-pin case fan

SKU CH-ZKV4-PP7W0

40 mm hydraulic-bearing fan runs on 24 V DC at 1.9 W with a 3-pin connector

  • Fan Size40mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

SXDOOL DFB402024M 40mm 24V Server Fan

The SXDOOL DFB402024M is a 40mm case fan built for 24V DC operation. It draws 1.9W and connects through a 3-pin hydraulic-bearing assembly. This component targets server and industrial chassis that supply a 24V fan header.

Suited for 24V server bays.

Technicians maintaining rackmount gear or embedded appliances with native 24V cooling circuits will find a direct fit. Builders assembling conventional desktop systems cannot use this fan on typical motherboard headers. Buyers needing variable speed control via PWM should consider other models.

24V DC input voltage decides compatibility

The single specification that determines fit is the 24V DC power requirement. Only enclosures and controllers rated for 24V fan outputs can drive this unit correctly. Verify the header voltage before purchase.

Helstu kostir

  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

Tæknilýsing

Fan Size40mm
Bearing TypeHydraulic
Power Connector3 Pin

Spurningar um þessa vöru

What mounting holes does the 40 mm frame use?

The fan has a 40 mm square frame with four corner mounting holes for standard M3 screws.

How do I connect the 3-pin plug to a 24 V source?

Insert the 3-pin connector into a 24 V fan header, aligning the keyed notch; the third wire carries the tachometer signal.

When should the hydraulic bearing be replaced?

Replace the fan when the hydraulic bearing becomes noisy or the rotor speed drops below the rated 1.9 W draw.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.