暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small square 40mm case fan with black frame and three-pin connector

SXDOOL

SXDOOL DFB402024M 40mm 24V 1.9W 3-pin case fan

SKU CH-ZKV4-PP7W0

40 mm hydraulic-bearing fan runs on 24 V DC at 1.9 W with a 3-pin connector

  • Fan Size40mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

SXDOOL DFB402024M 40mm 24V Server Fan

The SXDOOL DFB402024M is a 40mm case fan built for 24V DC operation. It draws 1.9W and connects through a 3-pin hydraulic-bearing assembly. This component targets server and industrial chassis that supply a 24V fan header.

Suited for 24V server bays.

Technicians maintaining rackmount gear or embedded appliances with native 24V cooling circuits will find a direct fit. Builders assembling conventional desktop systems cannot use this fan on typical motherboard headers. Buyers needing variable speed control via PWM should consider other models.

24V DC input voltage decides compatibility

The single specification that determines fit is the 24V DC power requirement. Only enclosures and controllers rated for 24V fan outputs can drive this unit correctly. Verify the header voltage before purchase.

特長

  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

仕様

Fan Size40mm
Bearing TypeHydraulic
Power Connector3 Pin

この商品に関する質問

What mounting holes does the 40 mm frame use?

The fan has a 40 mm square frame with four corner mounting holes for standard M3 screws.

How do I connect the 3-pin plug to a 24 V source?

Insert the 3-pin connector into a 24 V fan header, aligning the keyed notch; the third wire carries the tachometer signal.

When should the hydraulic bearing be replaced?

Replace the fan when the hydraulic bearing becomes noisy or the rotor speed drops below the rated 1.9 W draw.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。