Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small square 40mm case fan with black frame and three-pin connector

SXDOOL

SXDOOL DFB402024M 40mm 24V 1.9W 3-pin case fan

SKU CH-ZKV4-PP7W0

40 mm hydraulic-bearing fan runs on 24 V DC at 1.9 W with a 3-pin connector

  • Fan Size40mm
  • Bearing TypeHydraulic
  • Power Connector3 Pin
  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

SXDOOL DFB402024M 40mm 24V Server Fan

The SXDOOL DFB402024M is a 40mm case fan built for 24V DC operation. It draws 1.9W and connects through a 3-pin hydraulic-bearing assembly. This component targets server and industrial chassis that supply a 24V fan header.

Suited for 24V server bays.

Technicians maintaining rackmount gear or embedded appliances with native 24V cooling circuits will find a direct fit. Builders assembling conventional desktop systems cannot use this fan on typical motherboard headers. Buyers needing variable speed control via PWM should consider other models.

24V DC input voltage decides compatibility

The single specification that determines fit is the 24V DC power requirement. Only enclosures and controllers rated for 24V fan outputs can drive this unit correctly. Verify the header voltage before purchase.

Poudarki

  • 24 V operation fits server and industrial chassis
  • 40 mm frame suits tight 4020 mounting spaces
  • 9 W draw keeps power budgets low
  • hydraulic bearing reduces friction for longer life
  • 3-pin connector enables speed monitoring on standard headers

Specifikacije

Fan Size40mm
Bearing TypeHydraulic
Power Connector3 Pin

Vprašanja o tem izdelku

What mounting holes does the 40 mm frame use?

The fan has a 40 mm square frame with four corner mounting holes for standard M3 screws.

How do I connect the 3-pin plug to a 24 V source?

Insert the 3-pin connector into a 24 V fan header, aligning the keyed notch; the third wire carries the tachometer signal.

When should the hydraulic bearing be replaced?

Replace the fan when the hydraulic bearing becomes noisy or the rotor speed drops below the rated 1.9 W draw.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.