Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Three black 140mm square case fans with translucent frames and RGB lighting

Thermaltake

Thermaltake TOUGHFAN 14 RGB case fan 3-pack 140mm 25mm 107 CFM CL-F136-PL14SW-A

SKU CH-W2M9-CFXC2 MPN CL-F136-PL14SW-A

Three 140 mm hydraulic-bearing fans deliver 107 CFM each with addressable RGB lighting and PWM speed control from 500 to 2000 RPM

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm
  • Three fans deliver 107 CFM airflow each for strong case cooling
  • 24 addressable LEDs create 16.8 million colour options across the frame
  • Hydraulic bearings rated for quiet 30–35 dBA operation at speed
  • PWM control spans 500–2000 RPM to match thermal demand
  • 140 mm by 25 mm black frames fit standard radiator and case mounts

Three 140 mm fans with addressable RGB

This pack contains three 140 mm case fans with a 25 mm thickness and black frames. Each unit uses a hydraulic bearing and a PWM-controlled motor that runs between 500 and 2000 RPM. The set includes a controller for managing the 16.8 million colour addressable LEDs.

Builders who want high static pressure

The fans deliver 107 CFM airflow and 3.04 mm-H₂O static pressure at a noise level of 30 to 35 dBA, making them suited for radiator or case ventilation where both cooling performance and RGB effects are priorities. Systems that only have 140 mm mount points but require silence below 30 dBA should consider other options.

107 CFM airflow at 2000 RPM maximum speed

This single figure defines whether the fans can move enough air for your radiator or chassis layout. If your thermal design needs more than 107 CFM, this pack will not meet that requirement.

Helstu kostir

  • Three fans deliver 107 CFM airflow each for strong case cooling
  • 24 addressable LEDs create 16.8 million colour options across the frame
  • Hydraulic bearings rated for quiet 30–35 dBA operation at speed
  • PWM control spans 500–2000 RPM to match thermal demand
  • 140 mm by 25 mm black frames fit standard radiator and case mounts

Tæknilýsing

BrandThermaltake
SeriesToughfan
ModelCL-F136-PL14SW-A
Part NumberCL-F136-PL14SW-A
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air Flow107 CFM
Noise Level30 - 35 dBA
ColorBlack
LEDRGB
Dimensions140 x 140 x 25 mm
Sendingarþyngd1.18 kg
Stærð sendingar198 × 184 × 119 mm

Spurningar um þessa vöru

Will the 140 mm by 25 mm frame fit my case fan slots?

Each fan measures 140 x 140 x 25 mm, so any case with standard 140 mm mounting holes and at least 25 mm clearance will accept them.

How do I connect the three fans and the RGB lighting to my motherboard?

Plug each fan’s 4-pin PWM connector into a motherboard fan header and the 3-pin 5 V ARGB connector into an addressable RGB header; the included controller can combine the three fans onto one header if headers are scarce.

When should I expect to replace the hydraulic bearings?

The second-generation hydraulic bearings are rated for long life; under typical use at 500–2000 RPM they generally run for several years before any noticeable noise increase signals a replacement.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.