We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black 140mm square case fans with translucent frames and RGB lighting

Thermaltake

Thermaltake TOUGHFAN 14 RGB case fan 3-pack 140mm 25mm 107 CFM CL-F136-PL14SW-A

SKU CH-W2M9-CFXC2 MPN CL-F136-PL14SW-A

Three 140 mm hydraulic-bearing fans deliver 107 CFM each with addressable RGB lighting and PWM speed control from 500 to 2000 RPM

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm
  • Three fans deliver 107 CFM airflow each for strong case cooling
  • 24 addressable LEDs create 16.8 million colour options across the frame
  • Hydraulic bearings rated for quiet 30–35 dBA operation at speed
  • PWM control spans 500–2000 RPM to match thermal demand
  • 140 mm by 25 mm black frames fit standard radiator and case mounts

Three 140 mm fans with addressable RGB

This pack contains three 140 mm case fans with a 25 mm thickness and black frames. Each unit uses a hydraulic bearing and a PWM-controlled motor that runs between 500 and 2000 RPM. The set includes a controller for managing the 16.8 million colour addressable LEDs.

Builders who want high static pressure

The fans deliver 107 CFM airflow and 3.04 mm-H₂O static pressure at a noise level of 30 to 35 dBA, making them suited for radiator or case ventilation where both cooling performance and RGB effects are priorities. Systems that only have 140 mm mount points but require silence below 30 dBA should consider other options.

107 CFM airflow at 2000 RPM maximum speed

This single figure defines whether the fans can move enough air for your radiator or chassis layout. If your thermal design needs more than 107 CFM, this pack will not meet that requirement.

Highlights

  • Three fans deliver 107 CFM airflow each for strong case cooling
  • 24 addressable LEDs create 16.8 million colour options across the frame
  • Hydraulic bearings rated for quiet 30–35 dBA operation at speed
  • PWM control spans 500–2000 RPM to match thermal demand
  • 140 mm by 25 mm black frames fit standard radiator and case mounts

Specifications

BrandThermaltake
SeriesToughfan
ModelCL-F136-PL14SW-A
Part NumberCL-F136-PL14SW-A
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing TypeHydraulic
RPM500 ~ 2000 R.P.M
Air Flow107 CFM
Noise Level30 - 35 dBA
ColorBlack
LEDRGB
Dimensions140 x 140 x 25 mm
Shipping weight1.18 kg
Package size198 × 184 × 119 mm

Questions about this item

Will the 140 mm by 25 mm frame fit my case fan slots?

Each fan measures 140 x 140 x 25 mm, so any case with standard 140 mm mounting holes and at least 25 mm clearance will accept them.

How do I connect the three fans and the RGB lighting to my motherboard?

Plug each fan’s 4-pin PWM connector into a motherboard fan header and the 3-pin 5 V ARGB connector into an addressable RGB header; the included controller can combine the three fans onto one header if headers are scarce.

When should I expect to replace the hydraulic bearings?

The second-generation hydraulic bearings are rated for long life; under typical use at 500–2000 RPM they generally run for several years before any noticeable noise increase signals a replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.