Thermaltake
Thermaltake TOUGHFAN 14 RGB case fan 3-pack 140mm 25mm 107 CFM CL-F136-PL14SW-A
Three 140 mm hydraulic-bearing fans deliver 107 CFM each with addressable RGB lighting and PWM speed control from 500 to 2000 RPM
- Fan Counts3 Fans
- Fan ControllerController
- TypeCase Fan
- CompatibilityCase
- Fan Size140mm
- Fan Thickness25mm
- Three fans deliver 107 CFM airflow each for strong case cooling
- 24 addressable LEDs create 16.8 million colour options across the frame
- Hydraulic bearings rated for quiet 30–35 dBA operation at speed
- PWM control spans 500–2000 RPM to match thermal demand
- 140 mm by 25 mm black frames fit standard radiator and case mounts
Three 140 mm fans with addressable RGB
This pack contains three 140 mm case fans with a 25 mm thickness and black frames. Each unit uses a hydraulic bearing and a PWM-controlled motor that runs between 500 and 2000 RPM. The set includes a controller for managing the 16.8 million colour addressable LEDs.
Builders who want high static pressure
The fans deliver 107 CFM airflow and 3.04 mm-H₂O static pressure at a noise level of 30 to 35 dBA, making them suited for radiator or case ventilation where both cooling performance and RGB effects are priorities. Systems that only have 140 mm mount points but require silence below 30 dBA should consider other options.
107 CFM airflow at 2000 RPM maximum speed
This single figure defines whether the fans can move enough air for your radiator or chassis layout. If your thermal design needs more than 107 CFM, this pack will not meet that requirement.
Høydepunkter
- Three fans deliver 107 CFM airflow each for strong case cooling
- 24 addressable LEDs create 16.8 million colour options across the frame
- Hydraulic bearings rated for quiet 30–35 dBA operation at speed
- PWM control spans 500–2000 RPM to match thermal demand
- 140 mm by 25 mm black frames fit standard radiator and case mounts
Spesifikasjoner
| Brand | Thermaltake |
|---|---|
| Series | Toughfan |
| Model | CL-F136-PL14SW-A |
| Part Number | CL-F136-PL14SW-A |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic |
| RPM | 500 ~ 2000 R.P.M |
| Air Flow | 107 CFM |
| Noise Level | 30 - 35 dBA |
| Color | Black |
| LED | RGB |
| Dimensions | 140 x 140 x 25 mm |
| Fraktvekt | 1.18 kg |
| Pakkestørrelse | 198 × 184 × 119 mm |
Spørsmål om denne varen
Will the 140 mm by 25 mm frame fit my case fan slots?
Each fan measures 140 x 140 x 25 mm, so any case with standard 140 mm mounting holes and at least 25 mm clearance will accept them.
How do I connect the three fans and the RGB lighting to my motherboard?
Plug each fan’s 4-pin PWM connector into a motherboard fan header and the 3-pin 5 V ARGB connector into an addressable RGB header; the included controller can combine the three fans onto one header if headers are scarce.
When should I expect to replace the hydraulic bearings?
The second-generation hydraulic bearings are rated for long life; under typical use at 500–2000 RPM they generally run for several years before any noticeable noise increase signals a replacement.
Også i denne avdelingen
Kunder sammenlignet disse
Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.
Black Box Corporation
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics
39,99 USD
0.00051888BTC
På lager