Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rackmount network switch, 24 RJ45 ports plus two SFP+ uplinks, front status LEDs

Ubiquiti Networks

Ubiquiti Networks USW-Pro-24-POE (400W) 24-port Layer 3 network switch

SKU CH-14WH-R2PP2 MPN USW-Pro-24-POE (400W)

A 24-port managed Layer 3 switch with 16 PoE+ and 8 PoE++ ports, two 10G SFP+ uplinks, 400W PoE budget, 88 Gbps switching capacity and near-silent cooling

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 2 x SFP+
  • Primary Port SpeedTotal non-blocking throughput 44 Gbps Switching capacity 88
  • Primary Port Type(24) GbE RJ45 ports (2) 1/10G SFP+ ports
  • Management InterfaceEthernet In-Band

Model Pro 24 PoE

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 24 ports with 44 Gbps non-blocking throughput for high-density connectivity
  • 16 PoE+ and 8 PoE++ ports delivering 400W total power for diverse devices
  • 2 SFP+ uplinks at 10 Gbps enabling fast backbone links
  • Layer 3 routing with static routes and DHCP relay simplifies network design
  • Near-silent cooling in a 1U rackmount chassis suits quiet environments

24-port Layer 3 PoE++ Switch

The Ubiquiti USW-Pro-24-POE (400W) is a managed rackmount switch delivering Layer 3 routing and high-power PoE across 24 Gigabit RJ45 ports and two 10G SFP+ uplinks. It provides 400W total PoE budget with 16 PoE+ and 8 PoE++ ports, plus near-silent cooling for quiet deployment.

Suited for PoE-heavy networks.

This switch fits medium-sized networks needing advanced Layer 3 features such as static routing, DHCP relay and ACLs alongside dense PoE++ for access points, cameras or VoIP phones. Buyers who require more than 24 copper ports or who need a purely fibre uplink configuration should consider other models.

400W PoE budget with 8 PoE++ ports

The single specification that decides fit is the 400W total PoE availability split across 16 PoE+ and 8 PoE++ RJ45 ports, which determines how many high-power devices can be powered simultaneously without an external injector.

Helstu kostir

  • 24 ports with 44 Gbps non-blocking throughput for high-density connectivity
  • 16 PoE+ and 8 PoE++ ports delivering 400W total power for diverse devices
  • 2 SFP+ uplinks at 10 Gbps enabling fast backbone links
  • Layer 3 routing with static routes and DHCP relay simplifies network design
  • Near-silent cooling in a 1U rackmount chassis suits quiet environments

Tæknilýsing

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro 24 PoE
Part NumberUSW-Pro-24-POE (400W)
FormatRackmount
Network Management TypeManaged
Primary Ports24 x RJ45 + 2 x SFP+
Primary Port SpeedTotal non-blocking throughput 44 Gbps
Switching capacity 88 Gbps
Forwarding rate 65.472 Mpps
Primary Port Type(24) GbE RJ45 ports
(2) 1/10G SFP+ ports
Management InterfaceEthernet In-Band
Switching MethodStore and Forward
VLAN SupportYes
Jumbo FramesYes
PoEYes
Layer3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsSystem Status
Ethernet PoE Speed/link/activity
SFP+ Link/activity
RPS Status
ButtonFactory reset
PoE Ports(16) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Power(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input, 52V DC, 7.69A; 11.5V DC, 2.61A
Dimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
WeightWithout mounting brackets: 4.3 kg (9.5 lb)
With mounting brackets: 4.4 kg (9.7 lb)
CertificationCE, FCC, IC
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Sendingarþyngd5.72 kg
Stærð sendingar521 × 394 × 127 mm

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the USW-Pro-24-POE (400W) power my existing PoE+ cameras and PoE++ access points at the same time?

Yes. It provides 16 GbE PoE+ ports and 8 GbE PoE++ ports with a 400 W total PoE budget, so both device types can run together within that limit.

How can I confirm the switch is forwarding at its rated 65.472 Mpps after installation?

The front-panel LEDs show system status, per-port speed/link/activity for RJ45 and SFP+ ports, and RPS status; managed dashboard counters also display real-time throughput and packet rates.

Do I need to buy SFP+ transceivers or a rack kit separately?

The box includes the switch and mounting accessories; SFP+ modules for the two 10 Gbps uplinks are not included and must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.