Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Silver rackmount network switch, 24 RJ45 ports plus two SFP+ uplinks, front status LEDs

Ubiquiti Networks

Ubiquiti Networks USW-Pro-24-POE (400W) 24-port Layer 3 network switch

SKU CH-14WH-R2PP2 MPN USW-Pro-24-POE (400W)

A 24-port managed Layer 3 switch with 16 PoE+ and 8 PoE++ ports, two 10G SFP+ uplinks, 400W PoE budget, 88 Gbps switching capacity and near-silent cooling

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 2 x SFP+
  • Primary Port SpeedTotal non-blocking throughput 44 Gbps Switching capacity 88
  • Primary Port Type(24) GbE RJ45 ports (2) 1/10G SFP+ ports
  • Management InterfaceEthernet In-Band

Model Pro 24 PoE

Overstrøkne versjoner finnes, men er ikke på lager her.

  • 24 ports with 44 Gbps non-blocking throughput for high-density connectivity
  • 16 PoE+ and 8 PoE++ ports delivering 400W total power for diverse devices
  • 2 SFP+ uplinks at 10 Gbps enabling fast backbone links
  • Layer 3 routing with static routes and DHCP relay simplifies network design
  • Near-silent cooling in a 1U rackmount chassis suits quiet environments

24-port Layer 3 PoE++ Switch

The Ubiquiti USW-Pro-24-POE (400W) is a managed rackmount switch delivering Layer 3 routing and high-power PoE across 24 Gigabit RJ45 ports and two 10G SFP+ uplinks. It provides 400W total PoE budget with 16 PoE+ and 8 PoE++ ports, plus near-silent cooling for quiet deployment.

Suited for PoE-heavy networks.

This switch fits medium-sized networks needing advanced Layer 3 features such as static routing, DHCP relay and ACLs alongside dense PoE++ for access points, cameras or VoIP phones. Buyers who require more than 24 copper ports or who need a purely fibre uplink configuration should consider other models.

400W PoE budget with 8 PoE++ ports

The single specification that decides fit is the 400W total PoE availability split across 16 PoE+ and 8 PoE++ RJ45 ports, which determines how many high-power devices can be powered simultaneously without an external injector.

Høydepunkter

  • 24 ports with 44 Gbps non-blocking throughput for high-density connectivity
  • 16 PoE+ and 8 PoE++ ports delivering 400W total power for diverse devices
  • 2 SFP+ uplinks at 10 Gbps enabling fast backbone links
  • Layer 3 routing with static routes and DHCP relay simplifies network design
  • Near-silent cooling in a 1U rackmount chassis suits quiet environments

Spesifikasjoner

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro 24 PoE
Part NumberUSW-Pro-24-POE (400W)
FormatRackmount
Network Management TypeManaged
Primary Ports24 x RJ45 + 2 x SFP+
Primary Port SpeedTotal non-blocking throughput 44 Gbps
Switching capacity 88 Gbps
Forwarding rate 65.472 Mpps
Primary Port Type(24) GbE RJ45 ports
(2) 1/10G SFP+ ports
Management InterfaceEthernet In-Band
Switching MethodStore and Forward
VLAN SupportYes
Jumbo FramesYes
PoEYes
Layer3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsSystem Status
Ethernet PoE Speed/link/activity
SFP+ Link/activity
RPS Status
ButtonFactory reset
PoE Ports(16) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(8) 60W PoE++; PoE/PoE+ (Pins 1, 2+; 3, 6-) / PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
Power(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input, 52V DC, 7.69A; 11.5V DC, 2.61A
Dimensions442 x 285 x 44 mm (17.4 x 11.2 x 1.7")
WeightWithout mounting brackets: 4.3 kg (9.5 lb)
With mounting brackets: 4.4 kg (9.7 lb)
CertificationCE, FCC, IC
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Fraktvekt5.72 kg
Pakkestørrelse521 × 394 × 127 mm

Andre versjoner av denne modellen

1 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will the USW-Pro-24-POE (400W) power my existing PoE+ cameras and PoE++ access points at the same time?

Yes. It provides 16 GbE PoE+ ports and 8 GbE PoE++ ports with a 400 W total PoE budget, so both device types can run together within that limit.

How can I confirm the switch is forwarding at its rated 65.472 Mpps after installation?

The front-panel LEDs show system status, per-port speed/link/activity for RJ45 and SFP+ ports, and RPS status; managed dashboard counters also display real-time throughput and packet rates.

Do I need to buy SFP+ transceivers or a rack kit separately?

The box includes the switch and mounting accessories; SFP+ modules for the two 10 Gbps uplinks are not included and must be purchased separately.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.