Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black square 60×25 mm case fan with two wires

Zyvpee

Zyvpee 2410ML-05W-B40 60×25 mm 24 V 0.12 A 2-pin case fan

SKU CH-9E0S-BZVS8

A 60 × 25 mm ball-bearing case fan running at 24 V and 0.12 A with a two-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling Fan
  • Compact 60 × 25 mm frame fits tight builds
  • 24 V 0.12 A draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies motherboard hookup
  • Non-LED black finish suits clean aesthetics

Zyvpee 24 V 60 mm case fan

The Zyvpee 2410ML-05W-B40 is a 60 mm square frame fan designed for 24 V DC systems. It draws 0.12 A through a two-pin power connector. The unit uses a ball bearing for rotation. It is intended for equipment cooling where a compact 24 V fan is required. Builders needing a 12 V or PWM-controlled fan cannot use this model.

Ball bearing 25 mm thick cooler

The single specification that decides fit is the 24 V 0.12 A electrical rating combined with the two-pin connector. The motor runs on 24 V DC only and provides no speed signal or control wire. The frame measures 60 mm by 60 mm with a 25 mm depth. A different voltage or a three-pin header makes this fan incompatible.

Fits 60 mm mounts with 24 V supply

The fan mounts in standard 60 mm square openings using the four corner holes. It requires a 24 V DC source wired to the two-pin plug. The non-LED black frame adds no lighting. The ball bearing suits continuous operation in inverter or industrial enclosures. It frees the builder from needing a 12 V rail or a four-pin header.

Helstu kostir

  • Compact 60 × 25 mm frame fits tight builds
  • 24 V 0.12 A draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies motherboard hookup
  • Non-LED black finish suits clean aesthetics

Tæknilýsing

BrandZyvpee
Series2410ML-05W-B40
Model2410ML-05W-B40
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling Fan
Dimensions60*25MM

Spurningar um þessa vöru

What does the 0.12 A current draw mean for my 24 V power rail?

It draws 0.12 A from a 24 V rail, so the rail must supply at least that much current for the fan to run.

What does the 2-pin connector limit compared to a 3-pin or 4-pin header?

A 2-pin connector provides power only; speed control and RPM reporting are not available.

Will the 60 mm by 25 mm frame fit my case or heatsink mount?

It fits any 60 mm square mounting pattern with 25 mm clearance for the frame thickness.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.