Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black square 60×25 mm case fan with two wires

Zyvpee

Zyvpee 2410ML-05W-B40 60×25 mm 24 V 0.12 A 2-pin case fan

SKU CH-9E0S-BZVS8

A 60 × 25 mm ball-bearing case fan running at 24 V and 0.12 A with a two-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling Fan
  • Compact 60 × 25 mm frame fits tight builds
  • 24 V 0.12 A draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies motherboard hookup
  • Non-LED black finish suits clean aesthetics

Zyvpee 24 V 60 mm case fan

The Zyvpee 2410ML-05W-B40 is a 60 mm square frame fan designed for 24 V DC systems. It draws 0.12 A through a two-pin power connector. The unit uses a ball bearing for rotation. It is intended for equipment cooling where a compact 24 V fan is required. Builders needing a 12 V or PWM-controlled fan cannot use this model.

Ball bearing 25 mm thick cooler

The single specification that decides fit is the 24 V 0.12 A electrical rating combined with the two-pin connector. The motor runs on 24 V DC only and provides no speed signal or control wire. The frame measures 60 mm by 60 mm with a 25 mm depth. A different voltage or a three-pin header makes this fan incompatible.

Fits 60 mm mounts with 24 V supply

The fan mounts in standard 60 mm square openings using the four corner holes. It requires a 24 V DC source wired to the two-pin plug. The non-LED black frame adds no lighting. The ball bearing suits continuous operation in inverter or industrial enclosures. It frees the builder from needing a 12 V rail or a four-pin header.

Prednosti

  • Compact 60 × 25 mm frame fits tight builds
  • 24 V 0.12 A draw keeps power use low
  • Ball bearing design extends operating life
  • Two-pin connector simplifies motherboard hookup
  • Non-LED black finish suits clean aesthetics

Špecifikácie

BrandZyvpee
Series2410ML-05W-B40
Model2410ML-05W-B40
TypeCPU Cooler Fan
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling Fan
Dimensions60*25MM

Otázky k tomuto produktu

What does the 0.12 A current draw mean for my 24 V power rail?

It draws 0.12 A from a 24 V rail, so the rail must supply at least that much current for the fan to run.

What does the 2-pin connector limit compared to a 3-pin or 4-pin header?

A 2-pin connector provides power only; speed control and RPM reporting are not available.

Will the 60 mm by 25 mm frame fit my case or heatsink mount?

It fits any 60 mm square mounting pattern with 25 mm clearance for the frame thickness.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.