Zyvpee
Zyvpee 2410ML-05W-B40 60×25 mm 24 V 0.12 A 2-pin case fan
A 60 × 25 mm ball-bearing case fan running at 24 V and 0.12 A with a two-pin connector
- TypeCPU Cooler Fan
- Bearing TypeBall
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- FeaturesInverter Cooling Fan
- Compact 60 × 25 mm frame fits tight builds
- 24 V 0.12 A draw keeps power use low
- Ball bearing design extends operating life
- Two-pin connector simplifies motherboard hookup
- Non-LED black finish suits clean aesthetics
Zyvpee 24 V 60 mm case fan
The Zyvpee 2410ML-05W-B40 is a 60 mm square frame fan designed for 24 V DC systems. It draws 0.12 A through a two-pin power connector. The unit uses a ball bearing for rotation. It is intended for equipment cooling where a compact 24 V fan is required. Builders needing a 12 V or PWM-controlled fan cannot use this model.
Ball bearing 25 mm thick cooler
The single specification that decides fit is the 24 V 0.12 A electrical rating combined with the two-pin connector. The motor runs on 24 V DC only and provides no speed signal or control wire. The frame measures 60 mm by 60 mm with a 25 mm depth. A different voltage or a three-pin header makes this fan incompatible.
Fits 60 mm mounts with 24 V supply
The fan mounts in standard 60 mm square openings using the four corner holes. It requires a 24 V DC source wired to the two-pin plug. The non-LED black frame adds no lighting. The ball bearing suits continuous operation in inverter or industrial enclosures. It frees the builder from needing a 12 V rail or a four-pin header.
Najważniejsze cechy
- Compact 60 × 25 mm frame fits tight builds
- 24 V 0.12 A draw keeps power use low
- Ball bearing design extends operating life
- Two-pin connector simplifies motherboard hookup
- Non-LED black finish suits clean aesthetics
Specyfikacja
| Brand | Zyvpee |
|---|---|
| Series | 2410ML-05W-B40 |
| Model | 2410ML-05W-B40 |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Inverter Cooling Fan |
| Dimensions | 60*25MM |
Pytania dotyczące tego produktu
What does the 0.12 A current draw mean for my 24 V power rail?
It draws 0.12 A from a 24 V rail, so the rail must supply at least that much current for the fan to run.
What does the 2-pin connector limit compared to a 3-pin or 4-pin header?
A 2-pin connector provides power only; speed control and RPM reporting are not available.
Will the 60 mm by 25 mm frame fit my case or heatsink mount?
It fits any 60 mm square mounting pattern with 25 mm clearance for the frame thickness.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001059BTC
Dostępny