Zyvpee
Zyvpee 3610KL-04W-B59 92mm 25mm 12V 0.43A 3-pin ball-bearing case fan
A 92 mm ball-bearing case fan running on 12 V at 0.43 A with a 3-pin connector
- TypeCase Fan
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Fan
- Ball bearing extends service life
- 12 V 0.43 A draws minimal power
- 92 mm × 25 mm fits standard mounts
- Three-pin connector enables speed monitoring
- Non-LED design keeps builds dark
Zyvpee 92 mm Ball-Bearing Fan
This 92 mm square fan uses a ball-bearing motor rated at 12 V and 0.43 A. It mounts in standard 92 mm case or CPU-cooler locations and connects through a three-pin header. The black, non-LED frame suits builds that prefer no lighting.
Airflow Headroom and Limits
The supplier lists model codes 540 and 2899 alongside speed references 52 and 57, indicating a speed range the fan can sustain. It handles typical chassis or low-profile cooler duties, but the 25 mm thickness and fixed voltage mean it cannot match larger or PWM-controlled units for high-static-pressure loads.
Build and Connector Practicalities
Ball-bearing construction gives longer service life than sleeve alternatives in continuous operation. The three-pin plug delivers power and tachometer feedback without PWM control, so speed varies with voltage only. Black finish and absent LEDs keep the appearance neutral in any orientation.
Helstu kostir
- Ball bearing extends service life
- 12 V 0.43 A draws minimal power
- 92 mm × 25 mm fits standard mounts
- Three-pin connector enables speed monitoring
- Non-LED design keeps builds dark
Tæknilýsing
| Brand | Zyvpee |
|---|---|
| Series | 3610KL-04W-B59 |
| Model | 3610KL-04W-B59 |
| Type | Case Fan |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Fan |
| Dimensions | 92*25MM |
Spurningar um þessa vöru
Will the 92 mm 3-pin ball-bearing fan fit the same mounting holes as my current 92 mm cooler?
Yes — the 92 mm square frame uses the standard 92 mm hole pattern, so it aligns with existing 92 mm mounts.
How can I confirm the fan is spinning at the correct speed after installation?
Connect the 3-pin header to the motherboard and check the RPM reading in BIOS or monitoring software; it should report a stable value.
Does the box include mounting screws or do I need to supply my own?
The fan ships as the bare unit only; four 92 mm mounting screws are not included and must be sourced separately.
Einnig í þessum vöruflokki
Fólk bar þetta saman
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



