Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Zyvpee

Zyvpee 3610KL-04W-B59 92mm 25mm 12V 0.43A 3-pin ball-bearing case fan

SKU CH-6997-BNEG9

A 92 mm ball-bearing case fan running on 12 V at 0.43 A with a 3-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Ball bearing extends service life
  • 12 V 0.43 A draws minimal power
  • 92 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed monitoring
  • Non-LED design keeps builds dark

Zyvpee 92 mm Ball-Bearing Fan

This 92 mm square fan uses a ball-bearing motor rated at 12 V and 0.43 A. It mounts in standard 92 mm case or CPU-cooler locations and connects through a three-pin header. The black, non-LED frame suits builds that prefer no lighting.

Airflow Headroom and Limits

The supplier lists model codes 540 and 2899 alongside speed references 52 and 57, indicating a speed range the fan can sustain. It handles typical chassis or low-profile cooler duties, but the 25 mm thickness and fixed voltage mean it cannot match larger or PWM-controlled units for high-static-pressure loads.

Build and Connector Practicalities

Ball-bearing construction gives longer service life than sleeve alternatives in continuous operation. The three-pin plug delivers power and tachometer feedback without PWM control, so speed varies with voltage only. Black finish and absent LEDs keep the appearance neutral in any orientation.

Kohokohdat

  • Ball bearing extends service life
  • 12 V 0.43 A draws minimal power
  • 92 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed monitoring
  • Non-LED design keeps builds dark

Tekniset tiedot

BrandZyvpee
Series3610KL-04W-B59
Model3610KL-04W-B59
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions92*25MM

Kysymyksiä tästä tuotteesta

Will the 92 mm 3-pin ball-bearing fan fit the same mounting holes as my current 92 mm cooler?

Yes — the 92 mm square frame uses the standard 92 mm hole pattern, so it aligns with existing 92 mm mounts.

How can I confirm the fan is spinning at the correct speed after installation?

Connect the 3-pin header to the motherboard and check the RPM reading in BIOS or monitoring software; it should report a stable value.

Does the box include mounting screws or do I need to supply my own?

The fan ships as the bare unit only; four 92 mm mounting screws are not included and must be sourced separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.