暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee 3610KL-04W-B59 92mm 25mm 12V 0.43A 3-pin ball-bearing case fan

SKU CH-6997-BNEG9

A 92 mm ball-bearing case fan running on 12 V at 0.43 A with a 3-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Ball bearing extends service life
  • 12 V 0.43 A draws minimal power
  • 92 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed monitoring
  • Non-LED design keeps builds dark

Zyvpee 92 mm Ball-Bearing Fan

This 92 mm square fan uses a ball-bearing motor rated at 12 V and 0.43 A. It mounts in standard 92 mm case or CPU-cooler locations and connects through a three-pin header. The black, non-LED frame suits builds that prefer no lighting.

Airflow Headroom and Limits

The supplier lists model codes 540 and 2899 alongside speed references 52 and 57, indicating a speed range the fan can sustain. It handles typical chassis or low-profile cooler duties, but the 25 mm thickness and fixed voltage mean it cannot match larger or PWM-controlled units for high-static-pressure loads.

Build and Connector Practicalities

Ball-bearing construction gives longer service life than sleeve alternatives in continuous operation. The three-pin plug delivers power and tachometer feedback without PWM control, so speed varies with voltage only. Black finish and absent LEDs keep the appearance neutral in any orientation.

特長

  • Ball bearing extends service life
  • 12 V 0.43 A draws minimal power
  • 92 mm × 25 mm fits standard mounts
  • Three-pin connector enables speed monitoring
  • Non-LED design keeps builds dark

仕様

BrandZyvpee
Series3610KL-04W-B59
Model3610KL-04W-B59
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions92*25MM

この商品に関する質問

Will the 92 mm 3-pin ball-bearing fan fit the same mounting holes as my current 92 mm cooler?

Yes — the 92 mm square frame uses the standard 92 mm hole pattern, so it aligns with existing 92 mm mounts.

How can I confirm the fan is spinning at the correct speed after installation?

Connect the 3-pin header to the motherboard and check the RPM reading in BIOS or monitoring software; it should report a stable value.

Does the box include mounting screws or do I need to supply my own?

The fan ships as the bare unit only; four 92 mm mounting screws are not included and must be sourced separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。