Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 90mm square frame 25mm thick 2-pin case fan

Zyvpee

Zyvpee AD0912HS-A70GL 90x25mm 12V 0.25A 2-pin case fan

SKU CH-TTNN-NWK5T

A 90 by 25 millimetre case fan running at 12 volts with a sleeve bearing and two-pin connector

  • TypeCase Fan
  • Bearing Typesleeve
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

Compact 90mm 12V case fan

The Zyvpee AD0912HS-A70GL is a 90 by 25 millimetre frame fan that runs on 12 volts and draws 0.25 amps. It uses a two-pin power connector and a sleeve bearing. The unit is designed for CPU cooling in tight chassis spaces where a 90mm footprint is required.

Two-pin voltage control only

The two-pin interface supplies fixed voltage without a speed signal or PWM input. Fan speed varies only with the voltage applied by the motherboard header or controller. Builders who need closed-loop RPM monitoring or automatic temperature curves cannot use this connector type.

Simple two-wire mounting

Installation uses standard 90mm screw holes and the two-pin plug fits any matching header. The sleeve bearing is quiet at low voltage but may develop noise or reduced lifespan if the fan is mounted horizontally with the shaft under side load. Check clearance against nearby cables before securing the frame.

Helstu kostir

  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

Tæknilýsing

Brand3ccooler.com
SeriesAD0912HS-A70GL
ModelAD0912HS-A70GL
TypeCase Fan
Bearing Typesleeve
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

Spurningar um þessa vöru

Should I pick the AD0912HS-A70GL or another 90 mm fan for my case?

The AD0912HS-A70GL is a 90 mm square frame with 25 mm thickness, 12 V and 0.25 A rating, so match those dimensions and voltage to your mounting holes and fan header.

What does the 0.25 A current draw mean when the fan is running in my PC?

At 12 V the fan draws 0.25 A, which equals about 3 W of power; the motherboard header must supply at least that much current for reliable start-up.

The 2-pin connector — what control does it give me over fan speed?

A 2-pin connector supplies constant 12 V with no PWM or voltage-control wire, so the fan runs at full speed unless the motherboard lowers the header voltage.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.