我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

Zyvpee

Zyvpee AD0912HS-A70GL 90x25mm 12V 0.25A 2-pin case fan

SKU CH-TTNN-NWK5T

A 90 by 25 millimetre case fan running at 12 volts with a sleeve bearing and two-pin connector

  • TypeCase Fan
  • Bearing Typesleeve
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

Compact 90mm 12V case fan

The Zyvpee AD0912HS-A70GL is a 90 by 25 millimetre frame fan that runs on 12 volts and draws 0.25 amps. It uses a two-pin power connector and a sleeve bearing. The unit is designed for CPU cooling in tight chassis spaces where a 90mm footprint is required.

Two-pin voltage control only

The two-pin interface supplies fixed voltage without a speed signal or PWM input. Fan speed varies only with the voltage applied by the motherboard header or controller. Builders who need closed-loop RPM monitoring or automatic temperature curves cannot use this connector type.

Simple two-wire mounting

Installation uses standard 90mm screw holes and the two-pin plug fits any matching header. The sleeve bearing is quiet at low voltage but may develop noise or reduced lifespan if the fan is mounted horizontally with the shaft under side load. Check clearance against nearby cables before securing the frame.

商品特色

  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

商品規格

Brand3ccooler.com
SeriesAD0912HS-A70GL
ModelAD0912HS-A70GL
TypeCase Fan
Bearing Typesleeve
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

商品問答

Should I pick the AD0912HS-A70GL or another 90 mm fan for my case?

The AD0912HS-A70GL is a 90 mm square frame with 25 mm thickness, 12 V and 0.25 A rating, so match those dimensions and voltage to your mounting holes and fan header.

What does the 0.25 A current draw mean when the fan is running in my PC?

At 12 V the fan draws 0.25 A, which equals about 3 W of power; the motherboard header must supply at least that much current for reliable start-up.

The 2-pin connector — what control does it give me over fan speed?

A 2-pin connector supplies constant 12 V with no PWM or voltage-control wire, so the fan runs at full speed unless the motherboard lowers the header voltage.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。