暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 90mm square frame 25mm thick 2-pin case fan

Zyvpee

Zyvpee AD0912HS-A70GL 90x25mm 12V 0.25A 2-pin case fan

SKU CH-TTNN-NWK5T

A 90 by 25 millimetre case fan running at 12 volts with a sleeve bearing and two-pin connector

  • TypeCase Fan
  • Bearing Typesleeve
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Fan
  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

Compact 90mm 12V case fan

The Zyvpee AD0912HS-A70GL is a 90 by 25 millimetre frame fan that runs on 12 volts and draws 0.25 amps. It uses a two-pin power connector and a sleeve bearing. The unit is designed for CPU cooling in tight chassis spaces where a 90mm footprint is required.

Two-pin voltage control only

The two-pin interface supplies fixed voltage without a speed signal or PWM input. Fan speed varies only with the voltage applied by the motherboard header or controller. Builders who need closed-loop RPM monitoring or automatic temperature curves cannot use this connector type.

Simple two-wire mounting

Installation uses standard 90mm screw holes and the two-pin plug fits any matching header. The sleeve bearing is quiet at low voltage but may develop noise or reduced lifespan if the fan is mounted horizontally with the shaft under side load. Check clearance against nearby cables before securing the frame.

特長

  • Compact 90mm frame fits tight builds
  • 25mm thickness suits standard mounting points
  • 12V 0.25A draw keeps power use low
  • Two-pin connector works with basic headers
  • Sleeve bearing runs quietly at idle

仕様

Brand3ccooler.com
SeriesAD0912HS-A70GL
ModelAD0912HS-A70GL
TypeCase Fan
Bearing Typesleeve
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Fan
Dimensions90*25mm

この商品に関する質問

Should I pick the AD0912HS-A70GL or another 90 mm fan for my case?

The AD0912HS-A70GL is a 90 mm square frame with 25 mm thickness, 12 V and 0.25 A rating, so match those dimensions and voltage to your mounting holes and fan header.

What does the 0.25 A current draw mean when the fan is running in my PC?

At 12 V the fan draws 0.25 A, which equals about 3 W of power; the motherboard header must supply at least that much current for reliable start-up.

The 2-pin connector — what control does it give me over fan speed?

A 2-pin connector supplies constant 12 V with no PWM or voltage-control wire, so the fan runs at full speed unless the motherboard lowers the header voltage.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。