Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black 172 by 38 mm AC axial case fan with two wires

Zyvpee

Zyvpee FP-108CX S1B 172x38mm AC case fan

SKU CH-BF3G-T1YGD

A 172 mm AC axial fan with ball bearing for 220-240 V inverter systems

  • TypeCase Fan
  • CompatibilityAC Fan
  • Fan Size170mm
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • 172×38 mm frame fits large chassis slots
  • Ball bearing reduces wear for longer service life
  • 220–240 V AC input suits mains-powered builds
  • 27 W at 50 Hz / 24 W at 60 Hz power draw
  • Two-wire connection simplifies installation

Product Identity

The Zyvpee FP-108CX S1B is a 172 by 38 millimetre AC axial case fan designed for mains-powered airflow in compatible enclosures. It operates on 220 to 240 volt supply at 50 or 60 hertz, drawing 0.18 or 0.16 ampere for 27 or 24 watt consumption. The unit uses a ball bearing and a two-wire power connection.

Suitable Buyers

This fan suits installers replacing an existing 170 millimetre AC unit with the same voltage, frequency and two-wire interface. It is not for builders who need a low-voltage PWM fan controlled by a motherboard header, nor for slots limited to a smaller mounting pattern.

Critical Specification

The defining specification is the 220 to 240 volt AC input at 50 or 60 hertz with a two-wire connector; the part will only function in systems that provide this exact mains supply and wiring arrangement.

Helstu kostir

  • 172×38 mm frame fits large chassis slots
  • Ball bearing reduces wear for longer service life
  • 220–240 V AC input suits mains-powered builds
  • 27 W at 50 Hz / 24 W at 60 Hz power draw
  • Two-wire connection simplifies installation

Tæknilýsing

SeriesFP-108CX S1B
ModelFP-108CX S1B
TypeCase Fan
CompatibilityAC Fan
Fan Size170mm
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan
Dimensions172*38mm

Spurningar um þessa vöru

What power source must I already have to run the 220 V–240 V AC fan?

A standard mains supply delivering 220 V–240 V at 50 Hz or 60 Hz is required; the fan draws 0.18 A / 27 W at 50 Hz and 0.16 A / 24 W at 60 Hz.

Will the two-wire lead connect to the PWM header on my older motherboard?

No — the fan uses a simple two-wire AC connection, not a PWM or DC header, so it cannot be plugged into a motherboard fan connector.

How can I confirm the FP-108CX S1B is spinning correctly after wiring it?

With mains power applied the 172 mm × 38 mm ball-bearing rotor should rotate steadily; you will hear smooth airflow and feel consistent exhaust from the frame.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.