Zyvpee
Zyvpee FP-108CX S1B 172x38mm AC case fan
A 172 mm AC axial fan with ball bearing for 220-240 V inverter systems
- TypeCase Fan
- CompatibilityAC Fan
- Fan Size170mm
- Bearing TypeBall
- Power Connector2 wires
- ColorBlack
- 172×38 mm frame fits large chassis slots
- Ball bearing reduces wear for longer service life
- 220–240 V AC input suits mains-powered builds
- 27 W at 50 Hz / 24 W at 60 Hz power draw
- Two-wire connection simplifies installation
Product Identity
The Zyvpee FP-108CX S1B is a 172 by 38 millimetre AC axial case fan designed for mains-powered airflow in compatible enclosures. It operates on 220 to 240 volt supply at 50 or 60 hertz, drawing 0.18 or 0.16 ampere for 27 or 24 watt consumption. The unit uses a ball bearing and a two-wire power connection.
Suitable Buyers
This fan suits installers replacing an existing 170 millimetre AC unit with the same voltage, frequency and two-wire interface. It is not for builders who need a low-voltage PWM fan controlled by a motherboard header, nor for slots limited to a smaller mounting pattern.
Critical Specification
The defining specification is the 220 to 240 volt AC input at 50 or 60 hertz with a two-wire connector; the part will only function in systems that provide this exact mains supply and wiring arrangement.
주요 특징
- 172×38 mm frame fits large chassis slots
- Ball bearing reduces wear for longer service life
- 220–240 V AC input suits mains-powered builds
- 27 W at 50 Hz / 24 W at 60 Hz power draw
- Two-wire connection simplifies installation
사양
| Series | FP-108CX S1B |
|---|---|
| Model | FP-108CX S1B |
| Type | Case Fan |
| Compatibility | AC Fan |
| Fan Size | 170mm |
| Bearing Type | Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | AC Axial Fan |
| Dimensions | 172*38mm |
이 상품에 대한 질문
What power source must I already have to run the 220 V–240 V AC fan?
A standard mains supply delivering 220 V–240 V at 50 Hz or 60 Hz is required; the fan draws 0.18 A / 27 W at 50 Hz and 0.16 A / 24 W at 60 Hz.
Will the two-wire lead connect to the PWM header on my older motherboard?
No — the fan uses a simple two-wire AC connection, not a PWM or DC header, so it cannot be plugged into a motherboard fan connector.
How can I confirm the FP-108CX S1B is spinning correctly after wiring it?
With mains power applied the 172 mm × 38 mm ball-bearing rotor should rotate steadily; you will hear smooth airflow and feel consistent exhaust from the frame.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.0000105BTC
재고 있음