Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Black 172 by 38 mm AC axial case fan with two wires

Zyvpee

Zyvpee FP-108CX S1B 172x38mm AC case fan

SKU CH-BF3G-T1YGD

A 172 mm AC axial fan with ball bearing for 220-240 V inverter systems

  • TypeCase Fan
  • CompatibilityAC Fan
  • Fan Size170mm
  • Bearing TypeBall
  • Power Connector2 wires
  • ColorBlack
  • 172×38 mm frame fits large chassis slots
  • Ball bearing reduces wear for longer service life
  • 220–240 V AC input suits mains-powered builds
  • 27 W at 50 Hz / 24 W at 60 Hz power draw
  • Two-wire connection simplifies installation

Product Identity

The Zyvpee FP-108CX S1B is a 172 by 38 millimetre AC axial case fan designed for mains-powered airflow in compatible enclosures. It operates on 220 to 240 volt supply at 50 or 60 hertz, drawing 0.18 or 0.16 ampere for 27 or 24 watt consumption. The unit uses a ball bearing and a two-wire power connection.

Suitable Buyers

This fan suits installers replacing an existing 170 millimetre AC unit with the same voltage, frequency and two-wire interface. It is not for builders who need a low-voltage PWM fan controlled by a motherboard header, nor for slots limited to a smaller mounting pattern.

Critical Specification

The defining specification is the 220 to 240 volt AC input at 50 or 60 hertz with a two-wire connector; the part will only function in systems that provide this exact mains supply and wiring arrangement.

Poudarki

  • 172×38 mm frame fits large chassis slots
  • Ball bearing reduces wear for longer service life
  • 220–240 V AC input suits mains-powered builds
  • 27 W at 50 Hz / 24 W at 60 Hz power draw
  • Two-wire connection simplifies installation

Specifikacije

SeriesFP-108CX S1B
ModelFP-108CX S1B
TypeCase Fan
CompatibilityAC Fan
Fan Size170mm
Bearing TypeBall
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan
Dimensions172*38mm

Vprašanja o tem izdelku

What power source must I already have to run the 220 V–240 V AC fan?

A standard mains supply delivering 220 V–240 V at 50 Hz or 60 Hz is required; the fan draws 0.18 A / 27 W at 50 Hz and 0.16 A / 24 W at 60 Hz.

Will the two-wire lead connect to the PWM header on my older motherboard?

No — the fan uses a simple two-wire AC connection, not a PWM or DC header, so it cannot be plugged into a motherboard fan connector.

How can I confirm the FP-108CX S1B is spinning correctly after wiring it?

With mains power applied the 172 mm × 38 mm ball-bearing rotor should rotate steadily; you will hear smooth airflow and feel consistent exhaust from the frame.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.