BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
4GB DDR3 1333MHz 204-pin SO-DIMM laptop memory upgrade using Samsung chips at 1.5V CL9
This A-Tech SODIMM adds 4 GB of DDR3 memory at 1333 MHz to a compatible notebook or all-in-one system. It matches the Samsung M471B5173BH0-CH9 and M471B5173DB0-CH9 part numbers for direct replacement. The single-rank 1Rx8 organisation and CL9 latency suit everyday multitasking workloads. Builders should confirm their platform supports DDR3 before ordering.
The module uses the standard 204-pin SO-DIMM form factor and runs at the DDR3 default voltage of 1.50 V. Unbuffered, non-ECC construction means it drops into ordinary consumer laptop slots without registration or error-correction overhead. Gold-edge contacts resist oxidation during repeated upgrades. No heatsink or tall profile is present, so it fits tight chassis clearance.
A-Tech backs every module with a lifetime warranty and provides complimentary United States technical support before, during and after purchase. Each stick undergoes quality-assurance testing to verify reliable operation. The warranty and support terms apply directly to this 4 GB DDR3 1333 MHz SODIMM. No additional software, cables or adapters are bundled.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for 1333 MHz at PC3-10600 bandwidth. It will operate at that speed if the system supports it, otherwise it downclocks to the highest speed the platform allows.
It uses the standard 204-pin SO-DIMM form factor for DDR3 laptops, notebooks and all-in-one systems. The key notch position matches the DDR3 specification, so it fits any compatible slot.
Power off the laptop and disconnect the battery if possible. Insert the module at an angle until the gold contacts are fully seated, then press down firmly until both side clips click. The step most often missed is pressing down hard enough to engage both clips.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?