BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
4GB DDR3 1333MHz 204-pin SO-DIMM laptop memory upgrade using Samsung chips at 1.5V CL9
This A-Tech SODIMM adds 4 GB of DDR3 memory at 1333 MHz to a compatible notebook or all-in-one system. It matches the Samsung M471B5173BH0-CH9 and M471B5173DB0-CH9 part numbers for direct replacement. The single-rank 1Rx8 organisation and CL9 latency suit everyday multitasking workloads. Builders should confirm their platform supports DDR3 before ordering.
The module uses the standard 204-pin SO-DIMM form factor and runs at the DDR3 default voltage of 1.50 V. Unbuffered, non-ECC construction means it drops into ordinary consumer laptop slots without registration or error-correction overhead. Gold-edge contacts resist oxidation during repeated upgrades. No heatsink or tall profile is present, so it fits tight chassis clearance.
A-Tech backs every module with a lifetime warranty and provides complimentary United States technical support before, during and after purchase. Each stick undergoes quality-assurance testing to verify reliable operation. The warranty and support terms apply directly to this 4 GB DDR3 1333 MHz SODIMM. No additional software, cables or adapters are bundled.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for 1333 MHz at PC3-10600 bandwidth. It will operate at that speed if the system supports it, otherwise it downclocks to the highest speed the platform allows.
It uses the standard 204-pin SO-DIMM form factor for DDR3 laptops, notebooks and all-in-one systems. The key notch position matches the DDR3 specification, so it fits any compatible slot.
Power off the laptop and disconnect the battery if possible. Insert the module at an angle until the gold contacts are fully seated, then press down firmly until both side clips click. The step most often missed is pressing down hard enough to engage both clips.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?