BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
A-Tech
4GB DDR3 1333MHz 204-pin SO-DIMM laptop memory upgrade using Samsung chips at 1.5V CL9
This A-Tech SODIMM adds 4 GB of DDR3 memory at 1333 MHz to a compatible notebook or all-in-one system. It matches the Samsung M471B5173BH0-CH9 and M471B5173DB0-CH9 part numbers for direct replacement. The single-rank 1Rx8 organisation and CL9 latency suit everyday multitasking workloads. Builders should confirm their platform supports DDR3 before ordering.
The module uses the standard 204-pin SO-DIMM form factor and runs at the DDR3 default voltage of 1.50 V. Unbuffered, non-ECC construction means it drops into ordinary consumer laptop slots without registration or error-correction overhead. Gold-edge contacts resist oxidation during repeated upgrades. No heatsink or tall profile is present, so it fits tight chassis clearance.
A-Tech backs every module with a lifetime warranty and provides complimentary United States technical support before, during and after purchase. Each stick undergoes quality-assurance testing to verify reliable operation. The warranty and support terms apply directly to this 4 GB DDR3 1333 MHz SODIMM. No additional software, cables or adapters are bundled.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for 1333 MHz at PC3-10600 bandwidth. It will operate at that speed if the system supports it, otherwise it downclocks to the highest speed the platform allows.
It uses the standard 204-pin SO-DIMM form factor for DDR3 laptops, notebooks and all-in-one systems. The key notch position matches the DDR3 specification, so it fits any compatible slot.
Power off the laptop and disconnect the battery if possible. Insert the module at an angle until the gold contacts are fully seated, then press down firmly until both side clips click. The step most often missed is pressing down hard enough to engage both clips.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?