BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
4GB DDR3 1333MHz 204-pin SO-DIMM laptop memory upgrade using Samsung chips at 1.5V CL9
This A-Tech SODIMM adds 4 GB of DDR3 memory at 1333 MHz to a compatible notebook or all-in-one system. It matches the Samsung M471B5173BH0-CH9 and M471B5173DB0-CH9 part numbers for direct replacement. The single-rank 1Rx8 organisation and CL9 latency suit everyday multitasking workloads. Builders should confirm their platform supports DDR3 before ordering.
The module uses the standard 204-pin SO-DIMM form factor and runs at the DDR3 default voltage of 1.50 V. Unbuffered, non-ECC construction means it drops into ordinary consumer laptop slots without registration or error-correction overhead. Gold-edge contacts resist oxidation during repeated upgrades. No heatsink or tall profile is present, so it fits tight chassis clearance.
A-Tech backs every module with a lifetime warranty and provides complimentary United States technical support before, during and after purchase. Each stick undergoes quality-assurance testing to verify reliable operation. The warranty and support terms apply directly to this 4 GB DDR3 1333 MHz SODIMM. No additional software, cables or adapters are bundled.
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The module is rated for 1333 MHz at PC3-10600 bandwidth. It will operate at that speed if the system supports it, otherwise it downclocks to the highest speed the platform allows.
It uses the standard 204-pin SO-DIMM form factor for DDR3 laptops, notebooks and all-in-one systems. The key notch position matches the DDR3 specification, so it fits any compatible slot.
Power off the laptop and disconnect the battery if possible. Insert the module at an angle until the gold contacts are fully seated, then press down firmly until both side clips click. The step most often missed is pressing down hard enough to engage both clips.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?