NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
A-Tech
64 GB DDR4 3200 ECC RDIMM module with 2Rx4 registered design and CL22 latency for server workloads
This 64GB DDR4 3200MHz module is built for servers and workstations that require error-correcting registered memory. It delivers 64GB capacity in a single 288-pin DIMM running at 1.20V with CL22 latency. The 2Rx4 organisation suits high-density configurations where data integrity is critical.
Registered buffering reduces electrical load on the memory controller, allowing larger memory arrays in multi-socket platforms. Major brand DRAM chips are used throughout and every module undergoes quality assurance testing for dependable operation. The standard DDR4 1.2V voltage ensures compatibility with existing DDR4 server power delivery.
Confirm that your motherboard accepts DDR4 registered ECC DIMMs and supports 3200MHz speeds at the required voltage. Systems limited to unbuffered UDIMMs or earlier DDR generations cannot use this module. Check the qualified vendor list or manual for maximum capacity per slot and total system limits.
| Brand | A-Tech |
|---|---|
| Capacity | 64GB |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module runs at 3200 MT/s with CL22 timing at 1.20 V, delivering PC4-25600 bandwidth when the platform supports that speed.
It requires a standard DDR4 288-pin DIMM slot; the registered design adds a buffer chip, so verify the motherboard supports RDIMM and has enough height clearance.
Power off the system, align the notch with the slot key, press firmly until both latches click, then enable ECC in the BIOS — skipping the BIOS step leaves error correction inactive.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?