Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Compact high-voltage DC-DC module with metal enclosure and terminal connections

Analog Technologies

Analog Technologies AHV12VN6KV1MAW High Voltage Power Supply 0 to -6kV 1mA 12V Input

SKU CH-EHZF-8GFAP

Compact DC-DC module converts 12 V to adjustable 0 to -6 kV at 1 mA for scientific equipment

  • TypeHigh Voltage Power Supply

Options 12V to -6000V 1mA

  • Compact 0 to -6 kV output for demanding HV applications
  • 1 mA maximum current supports precision low-power tasks
  • 12 V DC input enables simple system integration
  • 0 to 5 V control voltage gives full-span output modulation
  • Electronic shutdown control adds fast protection

Compact High-Voltage Module for Laboratory Use

This Analog Technologies module converts a low-voltage DC input into a regulated negative high-voltage output up to 6 kV with a maximum current of 1 mA. It is intended for engineers and researchers building or servicing equipment such as X-ray sources, spectroscopy instruments, electrospinning rigs or semiconductor process tools where a compact, programmable HV bias is required.

Stable Output Under Continuous Operation

The unit accepts a 24 V supply drawing between 80 mA and 450 mA depending on load, and delivers 0 to -6 kV proportional to a 0 to 5 V control signal with a 5 V reference accurate to ±0.05 V. Full-span modulation and electronic shutdown allow the output to be varied or disabled instantly without interrupting the input power, supporting long runs in analytical or deposition systems.

PCB-Mount Installation With Simple Control Wiring

The converter is designed for direct board-level integration using the supplied pin-out for input power, control voltage, reference and ground connections. Correct polarity on the 24 V rail and the control signal is essential; reversing either can damage the internal regulation stage. No external high-voltage cabling is included, so the builder must provide suitably rated leads and maintain clearance distances appropriate for 6 kV operation.

Privalumai

  • Compact 0 to -6 kV output for demanding HV applications
  • 1 mA maximum current supports precision low-power tasks
  • 12 V DC input enables simple system integration
  • 0 to 5 V control voltage gives full-span output modulation
  • Electronic shutdown control adds fast protection

Specifikacijos

TypeHigh Voltage Power Supply

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How much heat and input current does the 12 V version draw when running continuously at full output?

The 12 V input model is not described in the specifications; the documented unit operates from 24 V ± 1 V and draws between 80 mA and 450 mA depending on load.

What control signals and reference voltage must my system provide to regulate the output?

You need a 0 to 5 V control voltage and the module supplies a 5 V ± 0.05 V reference for setting the output from 0 to −6 kV.

Will this supply work with older equipment that expects a positive high-voltage output?

No, the output is 0 to −6 kV only, so it cannot directly replace a positive-polarity source.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.