Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact high-voltage DC-DC module with metal enclosure and terminal connections

Analog Technologies

Analog Technologies AHV12VN6KV1MAW High Voltage Power Supply 0 to -6kV 1mA 12V Input

SKU CH-EHZF-8GFAP

Compact DC-DC module converts 12 V to adjustable 0 to -6 kV at 1 mA for scientific equipment

  • TypeHigh Voltage Power Supply

Options 12V to -6000V 1mA

  • Compact 0 to -6 kV output for demanding HV applications
  • 1 mA maximum current supports precision low-power tasks
  • 12 V DC input enables simple system integration
  • 0 to 5 V control voltage gives full-span output modulation
  • Electronic shutdown control adds fast protection

Compact High-Voltage Module for Laboratory Use

This Analog Technologies module converts a low-voltage DC input into a regulated negative high-voltage output up to 6 kV with a maximum current of 1 mA. It is intended for engineers and researchers building or servicing equipment such as X-ray sources, spectroscopy instruments, electrospinning rigs or semiconductor process tools where a compact, programmable HV bias is required.

Stable Output Under Continuous Operation

The unit accepts a 24 V supply drawing between 80 mA and 450 mA depending on load, and delivers 0 to -6 kV proportional to a 0 to 5 V control signal with a 5 V reference accurate to ±0.05 V. Full-span modulation and electronic shutdown allow the output to be varied or disabled instantly without interrupting the input power, supporting long runs in analytical or deposition systems.

PCB-Mount Installation With Simple Control Wiring

The converter is designed for direct board-level integration using the supplied pin-out for input power, control voltage, reference and ground connections. Correct polarity on the 24 V rail and the control signal is essential; reversing either can damage the internal regulation stage. No external high-voltage cabling is included, so the builder must provide suitably rated leads and maintain clearance distances appropriate for 6 kV operation.

Kohokohdat

  • Compact 0 to -6 kV output for demanding HV applications
  • 1 mA maximum current supports precision low-power tasks
  • 12 V DC input enables simple system integration
  • 0 to 5 V control voltage gives full-span output modulation
  • Electronic shutdown control adds fast protection

Tekniset tiedot

TypeHigh Voltage Power Supply

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat and input current does the 12 V version draw when running continuously at full output?

The 12 V input model is not described in the specifications; the documented unit operates from 24 V ± 1 V and draws between 80 mA and 450 mA depending on load.

What control signals and reference voltage must my system provide to regulate the output?

You need a 0 to 5 V control voltage and the module supplies a 5 V ± 0.05 V reference for setting the output from 0 to −6 kV.

Will this supply work with older equipment that expects a positive high-voltage output?

No, the output is 0 to −6 kV only, so it cannot directly replace a positive-polarity source.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.