Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
APC AP7894 metered zero U rack PDU 208V 10ft cord

APC

APC AP7894 Metered Zero U Rack 5.7kVA PDU 208V 10ft

SKU CH-5B1Y-Y6EBH MPN AP7894

A metered zero-U rack PDU delivering 5.7 kVA at 208 V AC with a 10 ft cord

  • TypeMetered
  • Rack SizeZero U Rack
  • Input Voltage208 V AC
  • Cord Length10 ft
  • Output Voltage208 V AC
  • Output Frequency50/60Hz
  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Metered Zero U Rack PDU

The APC AP7894 is a metered power distribution unit designed for zero U rack mounting. It delivers 5.7 kVA at 208 V AC for server and networking equipment. Data centre operators and IT administrators use it to monitor aggregate load on each circuit.

Zero U form factor and 10 ft cord

The Zero U design mounts vertically along the rack rear, preserving horizontal rack space for compute gear. A 10 ft input cord reaches overhead or under-floor power feeds without slack. Metered readouts show real-time current draw, helping teams balance phases and avoid overloads.

Verify 208 V supply and rack depth

Confirm your facility provides 208 V AC single-phase or three-phase power before ordering. Ensure the rack depth accommodates the vertical chassis and that cord routing reaches the input source. Check that 50/60 Hz output frequency matches connected equipment ratings.

Privalumai

  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Specifikacijos

BrandAPC
ModelAP7894
TypeMetered
Rack SizeZero U Rack
Input Voltage208 V AC
Cord Length10 ft
Output Voltage208 V AC
Output Frequency50/60Hz
Siuntos svoris11.34 kg
Pakuotės dydis2134 × 152 × 127 mm

Klausimai apie šią prekę

What input voltage does the AP7894 require, and what maximum load does that support?

The AP7894 operates on 208 V AC input and is rated for a 5.7 kVA capacity, which caps the total connected load at approximately 5.7 kVA.

What rack mounting style does the Zero U design use, and how much vertical space does it consume?

The Zero U form factor mounts vertically along the side rails of a standard rack, consuming zero horizontal rack units so all U spaces remain free for equipment.

How is the 10 ft input cord connected, and what common mistake should be avoided during installation?

The 10 ft cord terminates in a 208 V AC plug that must match the facility receptacle; the frequent error is forcing an incompatible plug type instead of verifying the outlet configuration first.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.