Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
APC AP7894 metered zero U rack PDU 208V 10ft cord

APC

APC AP7894 Metered Zero U Rack 5.7kVA PDU 208V 10ft

SKU CH-5B1Y-Y6EBH MPN AP7894

A metered zero-U rack PDU delivering 5.7 kVA at 208 V AC with a 10 ft cord

  • TypeMetered
  • Rack SizeZero U Rack
  • Input Voltage208 V AC
  • Cord Length10 ft
  • Output Voltage208 V AC
  • Output Frequency50/60Hz
  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Metered Zero U Rack PDU

The APC AP7894 is a metered power distribution unit designed for zero U rack mounting. It delivers 5.7 kVA at 208 V AC for server and networking equipment. Data centre operators and IT administrators use it to monitor aggregate load on each circuit.

Zero U form factor and 10 ft cord

The Zero U design mounts vertically along the rack rear, preserving horizontal rack space for compute gear. A 10 ft input cord reaches overhead or under-floor power feeds without slack. Metered readouts show real-time current draw, helping teams balance phases and avoid overloads.

Verify 208 V supply and rack depth

Confirm your facility provides 208 V AC single-phase or three-phase power before ordering. Ensure the rack depth accommodates the vertical chassis and that cord routing reaches the input source. Check that 50/60 Hz output frequency matches connected equipment ratings.

Pluspunten

  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Specificaties

BrandAPC
ModelAP7894
TypeMetered
Rack SizeZero U Rack
Input Voltage208 V AC
Cord Length10 ft
Output Voltage208 V AC
Output Frequency50/60Hz
Verzendgewicht11.34 kg
Pakketafmetingen2134 × 152 × 127 mm

Vragen over dit artikel

What input voltage does the AP7894 require, and what maximum load does that support?

The AP7894 operates on 208 V AC input and is rated for a 5.7 kVA capacity, which caps the total connected load at approximately 5.7 kVA.

What rack mounting style does the Zero U design use, and how much vertical space does it consume?

The Zero U form factor mounts vertically along the side rails of a standard rack, consuming zero horizontal rack units so all U spaces remain free for equipment.

How is the 10 ft input cord connected, and what common mistake should be avoided during installation?

The 10 ft cord terminates in a 208 V AC plug that must match the facility receptacle; the frequent error is forcing an incompatible plug type instead of verifying the outlet configuration first.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.