暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
APC AP7894 metered zero U rack PDU 208V 10ft cord

APC

APC AP7894 Metered Zero U Rack 5.7kVA PDU 208V 10ft

SKU CH-5B1Y-Y6EBH MPN AP7894

A metered zero-U rack PDU delivering 5.7 kVA at 208 V AC with a 10 ft cord

  • TypeMetered
  • Rack SizeZero U Rack
  • Input Voltage208 V AC
  • Cord Length10 ft
  • Output Voltage208 V AC
  • Output Frequency50/60Hz
  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Metered Zero U Rack PDU

The APC AP7894 is a metered power distribution unit designed for zero U rack mounting. It delivers 5.7 kVA at 208 V AC for server and networking equipment. Data centre operators and IT administrators use it to monitor aggregate load on each circuit.

Zero U form factor and 10 ft cord

The Zero U design mounts vertically along the rack rear, preserving horizontal rack space for compute gear. A 10 ft input cord reaches overhead or under-floor power feeds without slack. Metered readouts show real-time current draw, helping teams balance phases and avoid overloads.

Verify 208 V supply and rack depth

Confirm your facility provides 208 V AC single-phase or three-phase power before ordering. Ensure the rack depth accommodates the vertical chassis and that cord routing reaches the input source. Check that 50/60 Hz output frequency matches connected equipment ratings.

特長

  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

仕様

BrandAPC
ModelAP7894
TypeMetered
Rack SizeZero U Rack
Input Voltage208 V AC
Cord Length10 ft
Output Voltage208 V AC
Output Frequency50/60Hz
配送重量11.34 kg
梱包サイズ2134 × 152 × 127 mm

この商品に関する質問

What input voltage does the AP7894 require, and what maximum load does that support?

The AP7894 operates on 208 V AC input and is rated for a 5.7 kVA capacity, which caps the total connected load at approximately 5.7 kVA.

What rack mounting style does the Zero U design use, and how much vertical space does it consume?

The Zero U form factor mounts vertically along the side rails of a standard rack, consuming zero horizontal rack units so all U spaces remain free for equipment.

How is the 10 ft input cord connected, and what common mistake should be avoided during installation?

The 10 ft cord terminates in a 208 V AC plug that must match the facility receptacle; the frequent error is forcing an incompatible plug type instead of verifying the outlet configuration first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。