Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
APC AP7894 metered zero U rack PDU 208V 10ft cord

APC

APC AP7894 Metered Zero U Rack 5.7kVA PDU 208V 10ft

SKU CH-5B1Y-Y6EBH MPN AP7894

A metered zero-U rack PDU delivering 5.7 kVA at 208 V AC with a 10 ft cord

  • TypeMetered
  • Rack SizeZero U Rack
  • Input Voltage208 V AC
  • Cord Length10 ft
  • Output Voltage208 V AC
  • Output Frequency50/60Hz
  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Metered Zero U Rack PDU

The APC AP7894 is a metered power distribution unit designed for zero U rack mounting. It delivers 5.7 kVA at 208 V AC for server and networking equipment. Data centre operators and IT administrators use it to monitor aggregate load on each circuit.

Zero U form factor and 10 ft cord

The Zero U design mounts vertically along the rack rear, preserving horizontal rack space for compute gear. A 10 ft input cord reaches overhead or under-floor power feeds without slack. Metered readouts show real-time current draw, helping teams balance phases and avoid overloads.

Verify 208 V supply and rack depth

Confirm your facility provides 208 V AC single-phase or three-phase power before ordering. Ensure the rack depth accommodates the vertical chassis and that cord routing reaches the input source. Check that 50/60 Hz output frequency matches connected equipment ratings.

Helstu kostir

  • Metered monitoring tracks power usage in real time
  • Zero U vertical mounting saves horizontal rack space
  • 7 kVA capacity supports high-density equipment loads
  • 208 V AC input and output matches data-centre infrastructure
  • 10 ft cord length allows flexible rack placement

Tæknilýsing

BrandAPC
ModelAP7894
TypeMetered
Rack SizeZero U Rack
Input Voltage208 V AC
Cord Length10 ft
Output Voltage208 V AC
Output Frequency50/60Hz
Sendingarþyngd11.34 kg
Stærð sendingar2134 × 152 × 127 mm

Spurningar um þessa vöru

What input voltage does the AP7894 require, and what maximum load does that support?

The AP7894 operates on 208 V AC input and is rated for a 5.7 kVA capacity, which caps the total connected load at approximately 5.7 kVA.

What rack mounting style does the Zero U design use, and how much vertical space does it consume?

The Zero U form factor mounts vertically along the side rails of a standard rack, consuming zero horizontal rack units so all U spaces remain free for equipment.

How is the 10 ft input cord connected, and what common mistake should be avoided during installation?

The 10 ft cord terminates in a 208 V AC plug that must match the facility receptacle; the frequent error is forcing an incompatible plug type instead of verifying the outlet configuration first.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.