NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
ASUS
Mid-tower chassis for ATX, Micro-ATX and Mini-ITX boards with a 160 mm front fan and 34 mm cable-routing space
The ProArt PA401 Standard Edition is a mid-tower chassis built for ATX, Micro-ATX and Mini-ITX motherboards. It ships with a tempered glass side panel, two 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. The front I/O includes two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2×2 Type-C port and a combined headphone and microphone jack. An integrated hub can control up to five PWM fans.
Check that your graphics card does not exceed 315 mm in length and that your CPU cooler is no taller than 160 mm. The power supply bay accepts units up to 170 mm long. Only two vertical expansion slots are available, so multi-slot add-in cards beyond the primary GPU cannot be fitted. Drive bays are configurable as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch, or four 2.5-inch positions.
The pre-installed 160 mm front fans and 120 mm rear fan deliver airflow out of the box, while the PWM hub lets you add up to three more fans without extra controllers. A one-touch latch opens the glass side panel for quick internal access, and a pet-proof power-off lock prevents accidental shutdowns. Removable dust filters on the front and bottom simplify cleaning, and 34 mm of cable-routing space behind the motherboard tray keeps wiring tidy.
| Motherboard Compatibility | ATX Micro-ATX Mini-ITX |
|---|---|
| Color | Black |
| Case Material | Steel, ABS plastic, tempered glass (tempered glass version only) |
| With Power Supply | No |
| Front Ports | 2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 × Headphone + Microphone |
The case includes two pre-installed 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. You must purchase the power supply, motherboard, CPU cooler, storage drives and GPU separately.
The chassis supports four configurations: one 3.5-inch plus three 2.5-inch drives, three 3.5-inch drives, two 3.5-inch plus two 2.5-inch drives, or four 2.5-inch drives. Pick the layout that matches your drive count and form factor.
Any graphics card up to 315 mm long will fit. Measure your card before buying; longer models will not install in this case.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?