NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
ASUS
Mid-tower chassis for ATX, Micro-ATX and Mini-ITX boards with a 160 mm front fan and 34 mm cable-routing space
The ProArt PA401 Standard Edition is a mid-tower chassis built for ATX, Micro-ATX and Mini-ITX motherboards. It ships with a tempered glass side panel, two 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. The front I/O includes two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2×2 Type-C port and a combined headphone and microphone jack. An integrated hub can control up to five PWM fans.
Check that your graphics card does not exceed 315 mm in length and that your CPU cooler is no taller than 160 mm. The power supply bay accepts units up to 170 mm long. Only two vertical expansion slots are available, so multi-slot add-in cards beyond the primary GPU cannot be fitted. Drive bays are configurable as one 3.5-inch plus three 2.5-inch, three 3.5-inch, two 3.5-inch plus two 2.5-inch, or four 2.5-inch positions.
The pre-installed 160 mm front fans and 120 mm rear fan deliver airflow out of the box, while the PWM hub lets you add up to three more fans without extra controllers. A one-touch latch opens the glass side panel for quick internal access, and a pet-proof power-off lock prevents accidental shutdowns. Removable dust filters on the front and bottom simplify cleaning, and 34 mm of cable-routing space behind the motherboard tray keeps wiring tidy.
| Motherboard Compatibility | ATX Micro-ATX Mini-ITX |
|---|---|
| Color | Black |
| Case Material | Steel, ABS plastic, tempered glass (tempered glass version only) |
| With Power Supply | No |
| Front Ports | 2 × USB 3.2 Gen 1 (Type-A) 1 × USB 3.2 Gen 2×2 (Type-C) 1 × Headphone + Microphone |
The case includes two pre-installed 160 mm PWM fans at the front and one 120 mm PWM fan at the rear. You must purchase the power supply, motherboard, CPU cooler, storage drives and GPU separately.
The chassis supports four configurations: one 3.5-inch plus three 2.5-inch drives, three 3.5-inch drives, two 3.5-inch plus two 2.5-inch drives, or four 2.5-inch drives. Pick the layout that matches your drive count and form factor.
Any graphics card up to 315 mm long will fit. Measure your card before buying; longer models will not install in this case.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?