BGears b-PWM 140 Red case fan 140mm 2000 RPM 110 CFM 2 Ball
- 1 Fan
- No Controller
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
BGears
A 140mm case fan with 15 blades and two-ball bearings delivers 110 CFM airflow at up to 2000 RPM and 35.8 dBA noise
The BGears b-PWM 140 Black is a 140 mm case fan built around a two-ball bearing for extended service life. It spins between 500 and 1800 RPM, pushing up to 110 CFM at a stated 35.8 dBA. A 4-pin PWM connector enables motherboard speed control, while a bundled 3-to-4-pin Molex adapter allows direct power-supply connection. Fifteen aerodynamic blades are designed to maintain airflow pressure through restrictive grilles or radiators.
This fan suits builders who need strong airflow for CPU coolers, radiators or high-heat chassis and who prefer mechanical bearing durability over fluid-dynamic quietness. PWM control lets the system reduce speed at idle, yet the minimum 500 RPM still produces audible airflow. Buyers targeting near-silent operation or who want addressable lighting will not find those features here. The single-fan pack also means multi-fan arrays require separate purchases.
The 1800 RPM ceiling determines the 110 CFM peak airflow and the 35.8 dBA noise rating quoted by the manufacturer. At this speed the two-ball bearing delivers its highest cooling capacity, making the figure the primary check for thermal-headroom planning. If a build requires lower maximum noise or a different airflow target, the fixed 1800 RPM limit becomes the deciding constraint.
| Brand | Bgears |
|---|---|
| Model | b-PWM 140 Black |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 2000 RPM |
| Air Flow | 110 CFM |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No |
| Siuntos svoris | 0.21 kg |
| Pakuotės dydis | 216 × 157 × 36 mm |
Kiti šio modelio variantai
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
The fan ships with a mini 4-pin connector for PWM control and a 3-to-4-pin Molex adapter for direct PSU power; either connection works.
At 25 mm thick it exceeds the 15 mm slim profile, so verify your chassis has standard 140 mm clearance before installing.
Check the RPM reading in BIOS or fan-control software while the PWM duty cycle is at maximum; the reported speed should approach 1800 RPM.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?