BGears b-PWM 140 Red case fan 140mm 2000 RPM 110 CFM 2 Ball
- 1 Fan
- No Controller
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
BGears
A 140mm case fan with 15 blades and two-ball bearings delivers 110 CFM airflow at up to 2000 RPM and 35.8 dBA noise
The BGears b-PWM 140 Black is a 140 mm case fan built around a two-ball bearing for extended service life. It spins between 500 and 1800 RPM, pushing up to 110 CFM at a stated 35.8 dBA. A 4-pin PWM connector enables motherboard speed control, while a bundled 3-to-4-pin Molex adapter allows direct power-supply connection. Fifteen aerodynamic blades are designed to maintain airflow pressure through restrictive grilles or radiators.
This fan suits builders who need strong airflow for CPU coolers, radiators or high-heat chassis and who prefer mechanical bearing durability over fluid-dynamic quietness. PWM control lets the system reduce speed at idle, yet the minimum 500 RPM still produces audible airflow. Buyers targeting near-silent operation or who want addressable lighting will not find those features here. The single-fan pack also means multi-fan arrays require separate purchases.
The 1800 RPM ceiling determines the 110 CFM peak airflow and the 35.8 dBA noise rating quoted by the manufacturer. At this speed the two-ball bearing delivers its highest cooling capacity, making the figure the primary check for thermal-headroom planning. If a build requires lower maximum noise or a different airflow target, the fixed 1800 RPM limit becomes the deciding constraint.
| Brand | Bgears |
|---|---|
| Model | b-PWM 140 Black |
| Fan Counts | 1 Fan |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 140mm |
| Fan Thickness | 25mm |
| Bearing Type | 2 Ball |
| RPM | 2000 RPM |
| Air Flow | 110 CFM |
| Power Connector | 4 Pin |
| Color | Black |
| LED | No |
| Peso di spedizione | 0.21 kg |
| Dimensioni del pacco | 216 × 157 × 36 mm |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The fan ships with a mini 4-pin connector for PWM control and a 3-to-4-pin Molex adapter for direct PSU power; either connection works.
At 25 mm thick it exceeds the 15 mm slim profile, so verify your chassis has standard 140 mm clearance before installing.
Check the RPM reading in BIOS or fan-control software while the PWM duty cycle is at maximum; the reported speed should approach 1800 RPM.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?