نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

BGears

BGears b-PWM 140 Black 140mm 2 Ball 2000 RPM 110 CFM case fan

SKU CH-9QXP-JNCJQ MPN b-PWM 140 Black

A 140mm case fan with 15 blades and two-ball bearings delivers 110 CFM airflow at up to 2000 RPM and 35.8 dBA noise

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size140mm
  • Fan Thickness25mm

LED No

  • 15 blades move 110 CFM for strong case airflow
  • 500–1800 PWM range lets the board tune speed to load
  • Two-ball bearing rated for long continuous operation
  • 8 dBA at full speed keeps noise low under load
  • Mini 4-pin plus Molex adapter fits motherboard or PSU power

Cooling fan with two-ball bearing

The BGears b-PWM 140 Black is a 140 mm case fan built around a two-ball bearing for extended service life. It spins between 500 and 1800 RPM, pushing up to 110 CFM at a stated 35.8 dBA. A 4-pin PWM connector enables motherboard speed control, while a bundled 3-to-4-pin Molex adapter allows direct power-supply connection. Fifteen aerodynamic blades are designed to maintain airflow pressure through restrictive grilles or radiators.

Suited for high-airflow builds.

This fan suits builders who need strong airflow for CPU coolers, radiators or high-heat chassis and who prefer mechanical bearing durability over fluid-dynamic quietness. PWM control lets the system reduce speed at idle, yet the minimum 500 RPM still produces audible airflow. Buyers targeting near-silent operation or who want addressable lighting will not find those features here. The single-fan pack also means multi-fan arrays require separate purchases.

1800 RPM maximum speed defines peak performance

The 1800 RPM ceiling determines the 110 CFM peak airflow and the 35.8 dBA noise rating quoted by the manufacturer. At this speed the two-ball bearing delivers its highest cooling capacity, making the figure the primary check for thermal-headroom planning. If a build requires lower maximum noise or a different airflow target, the fixed 1800 RPM limit becomes the deciding constraint.

أبرز المميزات

  • 15 blades move 110 CFM for strong case airflow
  • 500–1800 PWM range lets the board tune speed to load
  • Two-ball bearing rated for long continuous operation
  • 8 dBA at full speed keeps noise low under load
  • Mini 4-pin plus Molex adapter fits motherboard or PSU power

المواصفات

BrandBgears
Modelb-PWM 140 Black
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size140mm
Fan Thickness25mm
Bearing Type2 Ball
RPM2000 RPM
Air Flow110 CFM
Power Connector4 Pin
ColorBlack
LEDNo
وزن الشحنة0.21 kg
أبعاد الطرد216 × 157 × 36 mm

إصدارات أخرى من هذا الطراز

2 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the fan require a 4-pin PWM header on the motherboard for speed control?

The fan ships with a mini 4-pin connector for PWM control and a 3-to-4-pin Molex adapter for direct PSU power; either connection works.

Will the 25 mm thickness fit in a case designed for slim 15 mm fans?

At 25 mm thick it exceeds the 15 mm slim profile, so verify your chassis has standard 140 mm clearance before installing.

How can I confirm the fan is running at its rated 1800 RPM maximum?

Check the RPM reading in BIOS or fan-control software while the PWM duty cycle is at maximum; the reported speed should approach 1800 RPM.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.